Honeywell MT-SY-HWLM1916 Owners Manual - Page 8

Quick Installation Connecting The Monitor To The PC: 1. First, make sure the power is shut off to all units. 2. Connect one end of the video cable (VGA or DVI) to the corresponding port on the back of the LCD monitor and the other end to the corresponding port on the back of your PC. Fasten each end of the video cable with the built-in thumb screws to ensure a good connection. 3. Connect one end of the AC Power Adaptor to the back of the monitor. 4. Plug the other end of the AC Power Adaptor into the wall outlet. NOTE: It is recommended to plug your LCD monitor and computer into a surge bar, or power strip, in order to protect your electronics from damage caused by unstable power or power surges. 5. Turn on your computer and LCD monitor. Layout Of Connections: 08. USB 2.0 09. USB 2.0 Anti-theft Lock 07. USB 2.0 06. USB 2.0 05. USB 2.0 04. Audio Connector 03. VGA Connector 02. DVI Connector 01. Power Connector Upward / Downward Adjustment 01. Power Connector 02. DVI Connector 03. VGA Connector 04. Audio Connector 05. USB 2.0 06. USB 2.0 07. USB 2.0 08. USB 2.0 09. USB 2.0 AC Power Input DVI Digital Signal Input VGA Analog Signal Input Audio Input Input Output Output Output Output - 6 -