Honeywell PCR426W User Manual - Page 6

Declaration Of Conformity - dual projection weather forecaster

Page 6 highlights

SPECIFICATIONS Main Unit Time 12 hour display in hh: mm format Date format: month - day User-selectable US Time Zone Day of the week: User-selectable in three languagesEnglish, Spanish or French Dual 4 minutes crescendo alarm with snooze Ice Warning Pre-Alarm with programmable time intervals Weather Indoor Temperature Proposed operating range: -5.0°C to +50.0°C/23.0°F to 122.0°F Temperature resolution: 0.1°C/0.2°F User-selectable (°F or °C) temperature display Weather Forecast in six large graphic icons EL backlight Low battery indicator Projection Focus adjustment 180° projected image rotation and flip Light sensor detects low light conditions (100 LUX and lower) Remote Sensor Remote Temperature Proposed operating range with alkaline batteries: -20.0°C to + 70.0°C/-4.0°F to + 158°F Proposed operating range with lithium batteries: -38.8°C to + 70.0°C/-38.0°F to +158°F Temperature resolution: 0.1°C/0.2°F Low battery indicator RF Transmission Frequency: 433 MHz Maximum number of remote sensors: 3 (one included) RF transmission range: Maximum 100 feet (30 meters) Temperature transmission cycle: approximately 45 seconds Power Main unit: 4 AA size (UM-3) 1.5V batteries (not included) AC/DC adapter - 7.5 V (included) Remote Sensor: 2 AA size (UM-3) 1.5V batteries (not included) 21 Dimensions Main unit: 3.25(L) x 4.5(H) x 1.25(D) inches Remote sensor: 2.37(L) x 4(H) x 1(D) inch FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment had been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment, installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to improve or correct turning the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. 22 DECLARATION OF CONFORMITY We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 5036128395 declare that the product Product No.: PCR426W Product Name: Weather Forecaster with Dual Projection Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New Territories, Hong Kong is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. The information above is not to be used as a contact for support or sales. Please call our customer service hotline (refer to the Standard Warranty Information) for all injuries instead. STANDARD WARRANTY INFORMATION This product is warranted from manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and repair. Note that online product registration is required to ensure valid warranty protection. To register your product, go to our Company website at: www.honeywellweatherstations.com. Click Online Product Registration under the Customer Service menu. Should you require assistance with this product and its operation, please contact our Customer Service Hotline 1(866) 443 3543. Please direct all returns to the place of the original purchase. Should this not be possible, contact Hideki Customer Service Hotline for assistance and to obtain a Return Merchandise Authorization (RMA). Returns without a return authorization will be refused. Please retain your original receipt as you may be asked to provide a copy for proof of purchase. Hideki Electronics, Inc. reserves the right to repair or replace the product at our option. Copyright (2007) Hideki Electronics Inc. All Rights Reserved. The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. All user manual contents and information are subject to change. M1H426001 23 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

22
21
24
23
Dimensions
Main unit: 3.25(L) x 4.5(H) x 1.25(D) inches
Remote sensor: 2.37(L) x 4(H) x 1(D) inch
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modification to this unit not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment had been tested and found to comply
with the limits for a Class B Digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment, installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to improve or correct turning the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician
for help.
STANDARD WARRANTY INFORMATION
This product is warranted from manufacturing defects for
one year
from date of retail purchase. It does not cover
damages or wear resulting from accident, misuse, abuse,
commercial use, or unauthorized adjustment and repair.
Note that online product registration is required to ensure
valid warranty protection.
To register your product, go to our Company website at:
www.honeywellweatherstations.com
. Click Online
Product Registration under the Customer Service menu.
Should you require assistance with this product and its
operation, please contact our
Customer Service Hotline
1(866) 443 3543
.
Please direct all returns to the place of the original purchase.
Should this not be possible, contact Hideki Customer Service
Hotline for assistance and to obtain a Return Merchandise
Authorization (RMA). Returns without a return authorization
will be refused. Please retain your original receipt as you
may be asked to provide a copy for proof of purchase.
Hideki Electronics, Inc. reserves the right to repair or replace
the product at our option.
Copyright (2007) Hideki Electronics Inc. All Rights Reserved.
The Honeywell Trademark is used under license from
Honeywell Intellectual Properties Inc.
Honeywell International Inc. makes no representations or
warranties with respect to this product.
All user manual contents and information are subject to
change.
M1H426001
DECLARATION OF CONFORMITY
We
Name: Hideki Electronics, Inc.
Address: 7865 SW Mohawk, Tualatin, OR 97062
Telephone No.: 5036128395
declare that the product
Product No.: PCR426W
Product Name: Weather Forecaster with Dual Projection
Manufacturer: Hideki Electronics Ltd.
Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk
Road, Kwai Chung, New Territories, Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received,
including interference that may cause undesired operation.
The information above is not to be used as a contact for
support or sales. Please call our customer service
hotline (refer to the Standard Warranty Information)
for all injuries instead.
SPECIFICATIONS
Main Unit
Time
12 hour display in hh: mm format
Date format: month - day
User-selectable US Time Zone
Day of the week: User-selectable in three languages-
English, Spanish or French
Dual 4 minutes crescendo alarm with snooze
Ice Warning Pre-Alarm with programmable time intervals
Weather
Indoor Temperature
Proposed operating range: -5.0
°
C to +50.0
°
C/23.0
°
F to 122.0
°
F
Temperature resolution: 0.1
°
C/0.2
°
F
User-selectable (
°
F or
°
C) temperature display
Weather Forecast in six large graphic icons
EL backlight
Low battery indicator
Projection
Focus adjustment
180
°
projected image rotation and flip
Light sensor detects low light conditions (100 LUX and lower)
Remote Sensor
Remote Temperature
Proposed operating range with alkaline batteries:
-20.0
°
C to + 70.0
°
C/-4.0
°
F to + 158
°
F
Proposed operating range with lithium batteries:
-38.8
°
C to + 70.0
°
C/-38.0
°
F to +158
°
F
Temperature resolution: 0.1
°
C/0.2
°
F
Low battery indicator
RF Transmission Frequency: 433 MHz
Maximum number of remote sensors: 3 (one included)
RF transmission range: Maximum 100 feet (30 meters)
Temperature transmission cycle: approximately 45 seconds
Power
Main unit: 4 AA size (UM-3) 1.5V batteries (not included)
AC/DC adapter - 7.5 V (included)
Remote Sensor: 2 AA size (UM-3) 1.5V batteries (not
included)