Honeywell RCW3505N Owner's Manual - Page 19
Troubleshooting
View all Honeywell RCW3505N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
RCW35 Series and RCW25 Series Troubleshooting When the illuminated bell push is operated, very dim / no light appears on the push... Check the power supply. You should use a 16V 10VA transformer connection for an illuminated push. Follow step 4. The chime does not work... • Check that the wiring is done correctly according to step 4, using minimum 20AWG wire. If using batteries: • Check that the batteries are the correct type, LR14 'C' cells. Only use alkaline batteries. • Check that the batteries are fitted correctly (with correct polarity). • Check that batteries are not too low. The chime does not sound... • Check that the volume control is not at the minimum setting. Low battery light flashes... • When the chime battery is low, an amber LED located at the side of the chime will flash. Install new batteries in the chime, type LR14 'C' cells. Only use alkaline batteries. The icons keep on flashing... • The push associated with the icon is stuck. Check the push. 69-2173EFS_B.indd 17 17 69-2173EFS-03 4/17/2008 11:15:46 AM