Honeywell RCWL200A1007/N Owner's Manual - Page 11
Troubleshooting - n y times
UPC - 085267333993
View all Honeywell RCWL200A1007/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
RCWL200A and RCWL210A Troubleshooting Two 'beep' sounds are heard and LED flashes twice after the normal chime sound... This indicates a low battery in the chime. Install new batteries, type LR14 C size alkaline batteries. Three 'beep' sounds are heard and LED flashes three times after the normal chime sound... This indicates a low battery in the bell push that activated the chime. Install a new battery, type CR2032. When the bell push is operated, the red confidence light does not turn on, or is only on for a short time... Low battery. Install a new battery, type CR2032. The chime does not work... • Check that the batteries are the correct type. Only use alkaline batteries for chime. • Check that the batteries are fitted correctly (no wrong polarity). • Check that batteries are not loose. • The chime could be out of range of the bell push. Try the chime in a different location. • The chime might not have learned the identity of the bell push. Follow the programming procedure in step 3. Note: Do not press program button for more than 15 seconds, this will delete all the memory! Repeat programming procedure in step 3 to restore operation. 9 69-2112EFS-07 69-2112EFS_D.indd 9 12/10/2009 12:05:45 PM