Honeywell REM5000; YTH5320; YTH5320R; YTH6320; YTH6320R Owner's Manual - Page 7
System settings
View all Honeywell REM5000; YTH5320; YTH5320R; YTH6320; YTH6320R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Wireless Remote Control System settings Press to select Press a SYSTEM button to select: • •HEAT COOL OFF • 8:03 AM • Press and hold either to select AUTO CHANGEOVER Heat: Thermostat controls only the heating system. Cool: Thermostat controls only the cooling system. Off: Heating and cooling systems are off. AUTO •HEAT COOL OFF 8:03 AM Note: The Auto Changeover option is available only if programmed by the system installer. Note: Emergency Heat can only be set at the thermostat. Press and hold HEAT or COOL for 3 seconds to select Auto Changeover (thermostat automatically selects heating or cooling depending on the indoor temperature). In Auto Changeover mode, you can press HEAT or COOL to display or adjust the settings for each system. To exit Auto Changeover mode, press and hold HEAT or COOL for 3 seconds. 5