Honeywell RLV3100A Owner's Manual - Page 1

Percentage of heating time * Temperature display RLV3100 User Guide Digital Non-programmable Thermostat NOTE: All cables and connections must comply with local electrical codes. This thermostat has tinned copper wires for line and load connections. Special CO/ALR solderless connectors must be used if these wires will be connected to aluminium conductors. 2-wire Installation Temperature adjustment buttons * The thermostat displays the percentage of heating time required to maintain the desired temperature. For example, is displayed when heating is activated 40 percent of the time. n Applications 1. The RLV3100 thermostat can be used to control an electric heating system such as an electric baseboard heater, a radiant ceiling, a radiant floor, a convector, etc. The thermostat cannot be used with the following: • a resistive load under 2 A • a resistive load over 12.5 A • systems driven by a contactor or a relay (inductive load) • fan-forced heating systems • central heating systems o Supplied Parts 2. • One (1) thermostat • Two (2) 6-32 mounting screws • Two (2) solderless connectors p Installation Procedure 3. TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN POWER PANEL TO AVOID ELECTRIC SHOCK. Loosen the screw underneath the thermostat and separate the front plate from the base plate. NOTE: The screw cannot be completely removed. Connect the thermostat wires to the power and to the load using solderless connectors for copper wires. The thermostat wires are not polarized; meaning either wire can be connected to the load or to the power supply. RLV3100 4-wire Installation Mount the back plate to the electrical box using the provided screws. Insert the screws through the left or right pair of mounting holes of the back plate. Set the switch on the back of the front plate to °C or °F to select the temperature display format. Re-install the front plate of the thermostat on the base plate and secure it in place with the screw underneath the thermostat. NOTE: If there is a protective film or sticker on the display, peel it off. 69-1917EF 7/24/06 1/2