Honeywell T8131B Owner's Manual - Page 35
bAt Lo
View all Honeywell T8131B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
The furnace or air conditioner on-time is too short or too long. The thermostat's current setting does not match the display temperature. bAt Lo remains on display after fresh batteries are installed. s Contact your heating or air conditioner contractor. If further assistance is needed, call Honeywell Customer Assistance at 1-800-468-1502. s Check that the wiring hole in the wall behind the wallplate was plugged with insulation to prevent drafts that could adversely affect thermostat operation. s Be aware that it is normal for the current setting and display temperature to differ occasionally. s Remove batteries. Wait one hour. Install fresh alkaline batteries. 35 69-0887-1
35
69-0887—1
The furnace or air conditioner
■
Contact your heating or air conditioner contractor.
on-time is too short or too long.
If further assistance is needed, call Honeywell
Customer Assistance at 1-800-468-1502.
The thermostat’s current setting
■
Check that the wiring hole in the wall behind the
does not match the display
wallplate was plugged with insulation to prevent
temperature.
drafts that could adversely affect thermostat
operation.
■
Be aware that it is normal for the current setting
and display temperature to differ occasionally.
bAt Lo
remains on display after
■
Remove batteries. Wait one hour. Install fresh
fresh batteries are installed.
alkaline batteries.