Honeywell T8196A Owner's Manual - Page 10

You can set up to six temperature changes with the pins supplied. We recommend at least five hours for each energy savings period. To change the pins or add a new energy savings period- • To insert a pin, push it straight into the selected notch on the program dial until it is completely seated. • To remove a pin, press against program dial and pull the pin straight out. DO NOT attempt to change a pin if it is engaged with the program index wheel. • On heating-cooling systems, you must remove the program pins from the heating program to set new times for your cooling program. Write down your colors and time for reprogramming at the next heating season. Also, you may want to change the temperature setting lever positions. Setting the Heating Program Decide when you want the temperature to reach the comfort level. Find the notch on the program dial that is one-half hour before this time and insert a red pin. The half-hour head start gives the furnace time to heat the house before you wake up or arrive home. WINTER SUMMER 1 NIGHT ENERGY SAVING PERIOD DAY ENERGY SAVING PERIOD TEMPERATURE °F °C BEGINS 58 14 10:00 PM ENDS 68 20 6:00 AM BEGINS 58 14 7:30 AM ENDS 68 20 4:00 PM PROGRAM PIN IN TEMPERATURE CONTROL °F °C BLUE 80 27 RED 75 24 BLUE 80 27 RED 75 24 PROGRAM PIN IN CONTROL RED BLUE RED BLUE 1 NOT APPLICABLE ON HEATING-ONLY MODEL. M8677 Fig. 5- Program examples. 10 69-0636-1