Honeywell T841A Owner's Manual - Page 2
Temperature Selection, System Switch and Fan Switch Settings - thermostat
View all Honeywell T841A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Temperature Selection To select the temperature setpoint, slide the lever to the desired point on the setpoint scale. A click is heard and an indent felt every two degrees as the setpoint lever moves. The enlarged, raised 5, 6, 7 and 8 on the right edge of the thermostat provide recognition by touch and sight for the 50°F (10°C), 60°F (16°C), 70°F (21°C) and 80°F (27°C) setpoints. System Switch and Fan Switch Settings To select System switch and Fan settings, slide the levers at the bottom of the thermostat base to the desired setting. Enlarged, raised letters on the wallplate and the audible aid click heard at each indent in setting System switch and Fan switch settings. T841A: The large EH, H, O and C are the EM. HT., HEAT, OFF and COOL System switch settings. The large A, O raised letters are the AUTO and ON Fan settings. T841B: The large H, O and C are the HEAT, OFF and COOL System switch settings. The large A, O raised letters are the AUTO and ON Fan settings. NOTE: If the information on this card is desired in Braille, call 1-800-468-1502 for a copy. Automation and Control Solutions Honeywell International Inc. Honeywell Limited-Honeywell Limitée 1985 Douglas Drive North 35 Dynamic Drive Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9 69-1044-2 G.H. Rev. 3-03 Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers. www.honeywell.com/yourhome