Honeywell T87K Owner's Manual - Page 2

System Types, System Settings, Fan Settings, Specifications - thermostat manual

Page 2 highlights

T87N/T87K • Owner's Manual Product application This thermostat provides electronic control of: • 24 VAC heating systems (T87K) • 24 VAC heating and cooling systems (T87N) System Types • Gas or oil heat (T87K) • Gas, oil, or electric heat with air conditioning (T87N) • Warm air, hot water, high-efficiency furnaces, heat pumps, steam, gravity • Heat only • Heat only with fan (T87N) • Heat only, 2-wire, and 3-wire hot-water valve (power open and close valves) (T87K) • Cool only (T87N) Fan Settings (T87N) • Auto, On Specifications Temperature Range • 40° to 90°F (4.5° to 32°C) Shipping Temperature • -20° to 120°F (-28.9° to 48.9°C) Operating Relative Humidity • 5% to 90% (non-condensing) System Settings (T87N) • Heat, Off, Cool Electrical Ratings • Voltage: 20-30 VAC • Running current: 0.02-1.0A Installation tips Install the thermostat about 5 feet (1.5 m) above the floor in an area with good air circulation at average temperature. NO NO NO Do not install in locations where the thermostat can be affected by: • Drafts or dead spots behind doors and in corners • Hot or cold air from ducts • Sunlight or radiant heat from appliances • Concealed pipes or chimneys • Unheated/uncooled areas such as an outside wall behind the thermostat 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

T87N/T87K • Owner's Manual
±
System Types
Gas or oil heat (
T87K
)
Gas, oil, or electric heat with air
conditioning (
T87N
)
Warm air, hot water, high-efficiency
furnaces, heat pumps, steam, gravity
Heat only
Heat only with fan (
T87N
)
Heat only, 2-wire, and 3-wire hot-water
valve (power open and close valves)
(
T87K
)
Cool only (
T87N
)
System Settings (
T87N
)
Heat, Off, Cool
Fan Settings (
T87N
)
Auto, On
Specifications
Temperature Range
40° to 90°F (4.5° to 32°C)
Shipping Temperature
-20° to 120°F (-28.9° to 48.9°C)
Operating Relative Humidity
5% to 90% (non-condensing)
Electrical Ratings
Voltage: 20–30 VAC
Running current: 0.02–1.0A
Install the thermostat about 5 feet (1.5 m) above the floor in an area
with good air circulation at average temperature.
Do not install in locations where the thermostat can be affected by:
Drafts or dead spots behind doors and in corners
Hot or cold air from ducts
Sunlight or radiant heat from appliances
Concealed pipes or chimneys
Unheated/uncooled areas such as an outside wall behind the thermostat
NO
NO
NO
Installation tips
Product application
This thermostat provides electronic control of:
24 VAC heating systems (
T87K
)
24 VAC heating and cooling systems (
T87N
)