Honeywell TH2210D Owner's Manual - Page 14
Modifying the schedule
View all Honeywell TH2210D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Operating Manual ENGLISH Modifying the schedule n Press the Set button 3 times until Set Schedule appears. The start time of the first period (Wake) of the week days (Mon-Fri) will flash. o Press the or button to set the time. p Press the Set button. The temperature setting for that period will flash. q To program the temperature settings for the cooling mode, place the System switch in Cool. To program the temperature settings for the heating mode, place the switch in Heat. r Press the or button to set the temperature. s Press the Set button. The start time of the next period will flash. t Repeat steps 2 through 6 for each of the remaining periods. u Once all adjustments are made, press the Run button to save them and exit. (The changes are also saved if you do not press any button for 60 seconds.) The Wake period for the weekdays is set to 6 a.m. and 70 °F (Heating mode). To skip a period (except Wake), press the Hold button for 4 sec. while that period is displayed. 10