Honeywell TH4210D1005 Owner's Manual - Page 20
English
UPC - 085267261203
View all Honeywell TH4210D1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH Operating Manual In case of difficulty Temperature Make sure heating and cooling temperatures are set to acceptable ranges: settings do not • Heat: 40° to 90°F (4.5° to 32°C). change • Cool: 50° to 99°F (10° to 37°C). "Cool On" or "Heat On" is flashing • Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor (see page 15). "Heat On" is not • Set the System switch to Heat, and set the temperature level above the displayed current room temperature (see page 7). "Cool On" is not • Set the System switch to Cool, and set the temperature level below the displayed current room temperature (see page 7). To restore Follow these steps to restore Energy Star default settings (see page 10): Energy Star® default settings 1. Press SET 3 times to display "Set Schedule." 2. Press and hold SET and RUN at the same time for 4 seconds. 3. Press RUN. 69-1760EFS-01 18