Honeywell VISTA-40 User Guide - Page 15
Bypassing Protection Zones, BYPASS 07 FRONT, UPSTAIRS BEDROOM, DISARMED BYPASS, READY TO ARM
View all Honeywell VISTA-40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
BYPASSING PROTECTION ZONES Using the 6 BYPASS Key This key is used when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. All bypasses are removed when an OFF sequence (security code plus OFF) is performed. Bypasses are also removed if the arming procedure that follows the bypass command is not successful. Note: The system will not allow fire or emergency zones to be bypassed. To bypass zones, the system must be disarmed first. BYPASS 1. Enter your security code and press 6 . 2. Enter zone number(s) for the zones to be bypassed (e.g., 01, 02, 03, etc.). Important! All single-digit numbers must be preceded by a zero (for example, enter 01 for zone 1). 3. When finished, the keypad will display the word BYPASS along with each bypassed zone number. Wait for these zones to be displayed before arming. Arming the system before bypassed zones are displayed eliminates all bypasses. BYPASS 07 FRONT UPS TAIRS BEDROOM Typical bypass message When finished, the keypad will display the word BYPASS along with each bypassed zone number. Wait for these zones to be displayed before arming. Arming the system before bypassed zones are displayed eliminates all bypasses. 4. Arm the system as usual when the keypad displays "ready" to arm message. DISARMED BYPASS READY TO ARM - 15 -