Hoover CH84005 Manual - Page 5

DRY USE Make sure that the plug is disconnected from the source of electricity. Remove the top of the vacuum and ensure that the cloth filter dust bag is properly installed. This vacuum comes equipped with a cloth dust bag filter. The dust bag filter should always be used when picking up dry material and can be easily disposed of without creating a mess. The dust bag should be used for dry cleaning only and must be removed when being used for wet use. The dry dust bag is not reusable or washable. Make sure the dust bag is secure inside the tank prior to use. Check bag frequently, and remove and dispose of debris when bag is about 4/5 full. Overfilling the bag may make it difficult to remove and increases the risk of the bag breaking and spilling the contents. Put the top of the vacuum back into its original position and secure it onto the tank snapping down the latches on both sides. Insert the flexible hose into the tank of the vacuum, assemble the steel wand and connect to the hose. Connect the plug to the electricity source. Push the switch to the on position and start cleaning. This vacuum is equipped with multiple tools to help with various applications. Scalloped bristle floor brush for carpets, tile and other flooring. Dust brush for hard to reach places like base boards and window sills, inside cars, furniture, etc. At the end of your work, turn off the machine by pushing the switch to the off position. Disconnect the plug from the source of electricity. Remove the cloth dust bag and dispose of debris. Wipe down machine with damp cloth. WET USE Make sure that the tank does NOT contain dust and disconnect the plug from the source of electricity. Remove the Dust filter bag. Replace the top back onto the vacuum ensuring the two latches are securely fastened. Connect the plug to the source of electricity. Turn the machine on by pushing the switch to the on position. The squeegee tool included with the vacuum is ideal for wet clean up. At the end of your work, turn off the machine by pushing the switch to the off position. Disconnect the plug from the source of electricity. Dispose of all liquid from tank by unclipping the disposal hose. Simply remove the end cap from the hose and slowly lower the drain hose to release the contents into a suitable drain. Replace end cap and clip hose back to machine. Wipe down machine with damp cloth. ATTENTION! This vacuum is equipped with a ball float shut off. When the maximum level of fluid has been reached, there will be a significant change in sound and airflow through the hose will decrease. This feature provides protection to the vacuum motor by shutting down airflow before motor damage occurs. Page 4