Hoover F5520 Manual - Page 5

Extractor Basics Fill the solution tank Unplug extractor from electrical outlet.  Pull up on solution tank handle (A) and remove solution tank (Fig. 4)  Turn tank upside down and unscrew cap (B) (Fig. 5). The cap consists of 2 pieces -the cap ring (C) and the solution tank valve (D).  Pour detergent into tank to detergent fill line (E) (Fig. 6).  Fill tank completely with hot tap water. NOTE: For best results, use only Hoover detergents. They are specifically formulated for use with your SteamVac™ Duo™ cleaner.  Replace cap. Be sure the valve (D) is in the cap ring (C) before screwing the cap back on the tank (Fig. 5).  Place tank back onto extractor (Fig. 7), pressing firmly to be sure tank is fully positioned. Caution: Detergents contain Anionic and Nonionic Surfactants. Avoid contact with the eyes and skin. In case of contact with eyes, flush with cold water for 15 minutes. In case of contact with skin, wash with water. If irritation persists, call a physician. For Medical Information (U.S.), call 1-800-752-7869. 4 A 5 B C D 6 E 7 Continued § 5