Hoover F6213-900 Manual - Page 7

Attach the hose Unplug deep cleaner from electrical outlet.  Place handle in upright position.  The hose and tool caddy can be removed from the cleaner if you desire.  Remove hose from tool caddy.  Open hose door (A) on back of deep cleaner (Fig. 13).  Align hose connector with hose and solution ports (C) (Fig. 14).  Push hose into port and lock in place.  To remove hose: Squeeze latches (D) on top and bottom of hose. Remove hose from port (Fig. 15).  Close hose door (A) tightly (inset). Select tool 16 17 13 14 A 15 D A C B A SpinScrub™ hand tool • Rotating brushes • Use on carpet to clean spots, small areas or stairs Stair/Upholstery nozzle • Built-in brush • Use on upholstery Attach tool Unplug deep cleaner from electrical outlet.  Slide tool onto hose. Snap tool over tab (E) on hose (Fig 18).  To remove tool: Push forward and up on latch (F) (Fig. 19). Slide tool off hose. 18 19 F E Continued § 7