Hoover FH40030PC Manual - Page 11

Picking up spills Your cleaner may also be used to pick up small liquid spills (1 quart or less, never to exceed 1/4 inch in depth) on non-carpeted floors. Turn Mode selector dial to the WASH position and release the trigger. Continue to move cleaner over the area to pick up the spill. ! CAUTION ! Do not use the cleaner to pick up flammable or combustible liquids or chemicals. Do not use the cleaner to pick up detergents that contain solvent based ingredients. 4. HOW TO USE tools Select tool A. Floor swivel tool 4.1 • Swivel head • 2 rows of brushes • Use to clean small, tight areas A B. Grout tool • Stiff brushes to use for more concentrated cleaning on stubborn grout stains B Attach hose and tool 4.2 ! CAUTION ! To reduce the risk of injury from moving parts, unplug cleaner. How to Connect Hose 4.2 Open hose door (A) on side of cleaner. 4.3 Align hose connector (B) with hose and solution A ports (C). Insert hose connector (B) until it snaps in place. To disconnect hose: Squeeze the hook (D) on bottom of hose connector. Remove hose from port. Close hose door tightly. 4.4 A D How to Connect Telescoping Wand 4.4 Slide wand (A) onto hose end (B). Snap wand over tab (C) on hose. To extend telescoping wand, pull button (D) toward you and pull wand away from you to the desired length. The full extension of the wand is indicated by a 'MAX' line. It is recommended you do not extend the wand past this line. To remove wand: Push forward and up on latch (E). Slide wand off hose. 4.3 B C D C E B 11