Hoover FH41010 Product Manual - Page 1
Hoover FH41010 Manual
View all Hoover FH41010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Cleaner won't run 1. Power cord not firmly plugged into outlet 1. Plug cord in firmly Low suction or won't pick up 2. Power switch not on 1. Dirty Water Tank full and the automatic shut-off engaged 2. Tanks and/or tank lids not in place 3. Nozzle not in place 2. Turn power switch on 1. Empty the Dirty Water Tank 2. Make sure tanks and/or tank lids are latched in place 3. Make sure Nozzle cover is latched in place Water puddles behind cleaner 1. Clean Water Tank not in place 2. Dirty Water Tank full 1. Make sure Clean Water Tank is installed properly 2. Empty Dirty Water Tank Cleaner solution won't dispense 1. Tanks not in place 2. Clean Water Tank is empty Brushes won't rotate 1. Brushes not in place 2. Debris stuck in brushes 1. Make sure both tanks are locked in place 2. Refill Clean Water Tank with water and solution 1. Turn unit off, check brushes are locked into place 2. Remove any debris stuck between brushes