Hoover FH50135 Product Manual - Page 13
After Using Tool
 |
View all Hoover FH50135 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
After Using Tool 1. Drain suction hose by turning cleaner ON and 35 holding nozzle up for several minutes. Do not press trigger. ! CAUTION ! Always turn off appliance before connecting or disconnecting hose. 2. Disconnect hose and solution tube from cleaner. 3. Drain solution tube by placing round end in sink and raising the trigger end at the hose nozzle above your head (Fig. 35). Press the trigger to release air and fluid.. 4. Replace Hose and tools in the Mesh Storage Bag. 13 Actual model may vary from images shown.
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19
-
20
 |
 |
13
Actual model may vary from images shown.
After Using Tool
1. Drain suction hose by turning cleaner ON and
holding nozzle up for several minutes. Do not
press trigger.
35
2. Disconnect hose and solution tube from cleaner.
3. Drain solution tube by placing round end in sink
and raising the trigger end at the hose nozzle
above your head (Fig. 35). Press the trigger to
release air and fluid..
4. Replace Hose and tools in the Mesh Storage
Bag.
CAUTION
!
!
Always turn off appliance before connecting
or disconnecting hose.