Hoover H3032 Manual - Page 11
To clean filters
View all Hoover H3032 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Recovery (lower) tank Automatic shut-off An automatic suction shut-off is built into the recovery tank to prevent the tank from overflowing. When the shut-off activates, the cleaner will not pick up debris and the sound of the motor will change. The recovery tank is full and must be emptied. How to empty Turn cleaner off and disconnect from electrical outlet. Although not necessary for satisfactory performance, it is recommended that the recovery tank be emptied after dry vacuuming and before wet operation. Check the solution tank also. It may need to be refilled at this time. 24 To remove tank, press down on release button (B) and pull tank straight out. 24 B 25 Remove tank lid (C). Empty tank. 25 C To clean filters The tank lid contains a washable, reusable filter. Clean this filter when suction is low or reduced. Turn cleaner off and disconnect from electrical outlet. 26 26 Remove recovery tank and lid (Figs. 24 & 25). Remove filter lid (A), then remove filter (B). Remove loose debris from filter by tapping the filter or gently brushing using your hand. The filter may also be rinsed for addition- al cleaning. Allow filter to air dry between uses. A B Continued § 11