Hoover ONEPWR Cordless High-Capacity Wet/Dry Utility Vacuum Product Manual - Page 6

ASSEMBLY Unpacking This product requires assembly. Carefully remove the product and any accessories from the box. All the items listed on the back of the box must be included at the time of purchase. WARNING! Items in this Assembly section are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. If any parts are damaged or missing, please call 800-406-2005 for assistance. WARNING! Do not use this product if it is not completely assembled or if any parts appear to be missing or damaged. Use of a product that is not properly and completely assembled or with damaged or missing parts could result in serious personal injury. Wet/Dry Vac Assembly See Figure 1, page 9 • Unlock the four locking latches and remove the lid. • Remove the hose and attachments from the collection container. NOTE: Make sure the filter is seated properly for dry vacuuming. Remove the filter for wet vacuuming. • Replace the lid and lock securely. • Press the locking tab on the flexible hose and insert into the vacuum port. Release the tab and make sure the hose is secure. • Attach the tapered end of the flexible hose into the extension wand. Connect second extension wand and/or accessories as needed. • To remove, pull the extension wands and accessories from the flexible hose. • To remove the flexible hose, press the locking tab as shown and pull away from the vacuum port. NOTE: The flexible hose and accessories can be stored in the collection container or on the lid of the wet/dry vac. WARNING! Do not attempt to modify this product or create accessories or attachments not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. OPERATION WARNING! Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING! Always remove battery pack from product when you are assembling parts, making adjustments, cleaning or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. WARNING! Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING! Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. Applications You may use this product for the following purpose: • Light-duty vacuuming of wet or dry surfaces. Installing/Removing Battery Pack See Figure 2, page 9 • Set the On/Off switch to the Off (0) position. • Insert the battery pack into the product as shown. • Make sure the latches on each side of the battery pack snap into place and that the battery pack is secured in the product before beginning operation. • Depress the latches to remove the battery pack. PG.5