Hoover ONEPWR Emerge Cordless Stick Vacuum Product Manual English - Page 2
Caution, Warning
View all Hoover ONEPWR Emerge Cordless Stick Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
CHARGING YOUR PRODUCT OPERATION CAUTION: Put product away after use to prevent tripping accidents. CAUTION: Not to be used for grooming a pet. CLEANING UP HIGH WARNING: To avoid serious personal injury, always remove the battery pack from the product when connecting or disconnecting accessories. 1 Plug in the charger, then attach the battery pack to the charger by aligning the ribs on the battery pack to the grooves in the charger. 2 Slide the battery pack into the charger. NOTE: The lights on the battery will show the state of charge. If the light on the charger flashes red, there is an error with the battery or the charger. If this occurs, disconnect and reconnect the battery or call customer service for support. Once charge is complete, lights on the battery and charger will turn off. 3 To remove the battery pack, press the latches and pull up. NOTE: During charging, the pack and ambient temperature should be between 41 to 86° F (5 and 30° C). The charger will sense if the pack, or ambient temperature, is too cold or too hot, and will return an error code (red LED will be on) and not charge the pack. ASSEMBLY Fully assemble product prior to use. 3 Push the handheld down onto the reach wand until it clicks into place. NOTE: Fully charge battery before first use. This will take 3-4 hours. Due to federal regulations, the battery does not come fully charged. STORING YOUR VACUUM 1 Choose the desired location, then place the mount on the wall at the desired height. Mark the wall anchor locations. Install the anchors and screw the mount to the wall. USING YOUR PRODUCT 1 • ON/OFF power button. • Unit turns on in Default mode. • To increase runtime for hard floors and everyday messes. • To increase suction for more embedded messes. • Battery LED is illuminated WHITE when on and RED when battery is low. NOTE: Pressing the - or + will increase or decrease the power level from where it is currently running. HANDHELD MODE WARNING: To avoid serious personal injury, always remove the battery pack from the product when connecting or disconnecting accessories. 1 Press the release button on attachment and pull to separate. 2 Push the accessory into the reach wand until it clicks into place. CAUTION: To avoid injury, particularly to face and head, keep hair, loose clothing, fingers and all parts of the body away from revolving brush. 1 Fit the dirt cup onto the hooks, then rock it up into the handheld so it secures into place. 2 Store the vacuum by firmly pressing the product into the wall mount to secure. NOTE: Accessories can be stored by sliding them onto the top and bottom of the wall mount. NOTE: Vacuum can be locked into upright position, but is not meant to be left standing unattended. 1 Press the release button on attachment and pull to separate. 3 Slide the battery pack into the charger. 2 Push the reach wand down onto the powered nozzle until it clicks into place. 2 Push the chosen accessory into the handheld until it clicks into place.