Hoover Pro Clean Pet Product Manual - Page 6

1. CLEANER ASSEMBLY CARTON CONTENTS 1.1 A. Carpet Cleaner Base B. Handle C. Clean Water/Solution Tank A D. Upholstery Tool E. Carpet Cleaning Detergent F. Hose B C D Remove all parts from carton and identify each item shown. Make sure all parts are located before disposing of packing materials. E F *Select models only 2. HOW TO ASSEMBLE BASE AND LOWER HANDLE 2.1 2.2 ASSEMBLY 2.1 Stand base in upright position. Push handle onto base. 2.2 Turn dial counter clockwise to "LOCK" postion. Dial should stop when locked and handle should feel secure. 2.3 Place clean water tank securely on handle above dirty water tank until it snaps into place. CORD STORAGE Wrap cord around cord hooks for convenient storage. Attach the plug end to cord. 2.3 BEFORE YOU BEGIN CLEANING 1. Vacuum thoroughly - For carpet, use a HOOVER® vacuum cleaner with an agitator for best results. Vacuum upholstery with a vacuum cleaner with cleaning tool attachments. Use a crevice tool to reach into tufts and folds. Do not use the carpet cleaner as a dry vacuum cleaner. 2. For upholstery, check cleaning code - Use your HOOVER® carpet washer only if the upholstery fabric is marked with a "W" (for "wet" clean) or "S/W" (for "solvent/dry" or "wet" clean). Do not clean fabric marked "S" ("solvent/dry" clean underneath area rugs/carpet, either move area rugs/ carpet to a only). If your upholstery does not have a code, seek non-wood hard floor surface or place waterproof material (e.g. professional assistance. plastic) underneath them before cleaning. 3. Test for colorfastness - Wet a white absorbent cloth with the solution. In a small, hidden area, gently rub the surface with the dampened cloth. Wait ten minutes and check for color ATTENTION removal or bleed with white paper towel or cloth. If surface has Prior to use, consult with Carpet Manufacturer on more than one color, check all colors. 4. When cleaning entire floor, move furniture out of area to be cleaned (may not be necessary if only high traffic areas are to be cleaned). For furniture too heavy to move, place aluminum foil or wax cleaning recommendations for natural fiber carpeting (including silk and wool), soft carpeting, and loop Berber carpeting. Do not use on rugs or carpet when dry cleaning is recommended. paper under legs. This will prevent wood finishes from staining carpet. Pin up furniture skirts and draperies. 5. Pretreat spots and heavy traffic areas with an appropriate ATTENTION Hoover Cleaning Solutions, see "Cleaning Solutions" section. Some Berber, Natural Fiber, and Soft Fiber carpets can Follow Directions on bottle. *Available at additional cost if not included with your model. 6. To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water spray. 7. To avoid wetting and possible damage to wood floors 6 fuzz with wear. Some vacuums & carpet cleaners can worsen this carpet wear. Test a hidden area before using on a full room & consult with your carpet manufacturer on cleaning recommendations.