Hoover S3410 Manual - Page 4

How to use - carpet cleaner

Page 4 highlights

2. How to use Cleaner description 2-1 12 1 2 3 4 5 11 10 9 8 7 6 The assembled cleaner will look like the drawing. 1. Furniture nozzle 2. Crevice tool 3. Cover: remove by lifting up top section of carrying handle and pulling forward. 4. Carrying handle 5. Rug and floor nozzle 6. Large wheels: provide easy towing, when cleaner is pulled over carpet, area rugs and door sills. 7. Tool rack: provides storage for crevice tool, dusting brush, and furniture nozzle. 8. ON-OFF switch: located on top of cleaner. 9. Dusting brush 10. Plastic latch ring: rotate to lock hand grip to extension wands or cleaning tools. 11. Extension wands: used with rug and floor nozzle. If added length is desired when using cleaning tools, add one or both wands to hose. 12. Hand grip Operate cleaner only at voltage specified on data plate on bottom of cleaner. This cleaner is intended for household use. ON-OFF switch Depress switch to turn cleaner ON or OFF. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. 2-2 Rug and floor nozzle The combination rug and floor nozzle has been designed to do an efficient cleaning job on both carpet and hard surface floors. The nozzle also has constant edge cleaning for cleaning along baseboards and solid furniture. Hard surface floor Lock brushes to clean bare floors by sliding indicator to BARE FLOOR. Rugs Release brushes to clean rugs or carpet by sliding indicator to RUG. 2-3 Cleaning stairs Clean stairs by placing cleaner on end as shown. Clean stairs from bottom to top. Cleaning tools A variety of useful cleaning tools, made for your cleaner is shown. The hard floor tool is available at additional cost from your Authorized Hoover Dealer, a Hoover Factory Service Center, by writing to The Hoover Company, North Canton, Ohio 44720, or through The Hoover Company online at www.hoovercompany.com Continued § 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

4
2. How to use
Cleaner description
2-1
The assembled cleaner will look like
the drawing.
1. Furniture nozzle
2. Crevice tool
3. Cover:
remove by lifting up top
section of carrying handle and pulling
forward.
4. Carrying handle
5. Rug and floor nozzle
6. Large wheels:
provide easy towing,
when cleaner is pulled over carpet,
area rugs and door sills.
7. Tool rack:
provides storage for
crevice tool, dusting brush, and
furniture nozzle.
8. ON-OFF switch:
located on top of
cleaner.
9. Dusting brush
10. Plastic latch ring:
rotate to lock
hand grip to extension wands or
cleaning tools.
11. Extension wands:
used
with rug and floor nozzle.
If
added length is desired when
using cleaning tools, add one or
both wands to hose.
12. Hand grip
Operate cleaner only at voltage
specified on data plate on
bottom of cleaner.
This cleaner is intended for
household use.
ON-OFF switch
Depress switch to turn cleaner ON
or OFF.
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other).
This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug.
If it still does not fit,
contact a qualified electrician to install
the proper outlet.
Do not change the
plug in any way.
2-2
2-3
Rug and floor nozzle
The combination rug and floor nozzle
has been designed to do an efficient
cleaning job on both carpet and hard
surface floors.
The nozzle also has constant edge
cleaning for cleaning along baseboards
and solid furniture.
Hard surface floor
Lock brushes to clean bare floors by
sliding indicator to BARE FLOOR.
Rugs
Release brushes to clean rugs or carpet
by sliding indicator to RUG.
Cleaning stairs
Clean stairs by placing cleaner on end
as shown.
Clean stairs from bottom
to top.
Cleaning tools
A variety of useful cleaning tools, made
for your cleaner is shown.
The hard floor tool is available at
additional cost from your Authorized
Hoover Dealer, a Hoover Factory Service
Center, by writing to The Hoover
Company, North Canton, Ohio 44720,
or through The Hoover Company online
at www.hoovercompany.com
1
2
3
4
5
6
7
8
9
10
11
12
Continued