Hoover U8161 Manual - Page 4

How to use

Get Hoover U8161 PDF manuals and user guides View all Hoover U8161 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

1-6 1-7 1-8 1-9 C Push screws into holes on back of handle (Fig. 1-6) and hose holder (Fig. 1-7). Tighten screws securely with a Phillips screwdriver. 2. How to use Place hose on holder. Remove label (C) from Custom Control™ switch. If label has come off during assembly, make sure switch is in OFF (down) position before plugging into electrical outlet. Cleaner description 2-1 1 2 3 7 6 4 5 19 22 21 8 9 11 10 20 12 17 14 The assembled cleaner will look like the drawing. 1. Handle 14. Nozzle control knob: 2. Custom Control™ power switch 3. Custom Control™ indicator slide knob to correct setting for height of carpet being cleaned. 15. Furniture guard 4. Tool cover 16. Headlight 5. Dusting brush 18 6. Powered hand tool 17. Edge groomers 18. Hose 7. Furniture nozzle 19. Hose holder 8. Dirt cup 20. Cord hooks: wrap 9. Dirt cup handle 10. HEPA cartridge filter 21 11. Pre-filter 12. Final filter cord around hooks for storage. The top hook rotates right or left for easy cord release. 21. Extension wand 13. Three position handle 22. Crevice wand: stores release pedal: step on in wand. lever to lower handle to operating or low positions. Operate cleaner only at voltage specified on data plate on bottom of cleaner. This cleaner is intended for household use. 15 13 16 Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. 4 2-2 A Custom Control™ switch Plug cord into electrical outlet. CARPET setting - turns brush rolls ON, for cleaning carpets and rugs. (Brush rolls will automatically stop turning when handle is raised to upright position.) BARE FLOOR setting - turns brush rolls OFF for cleaning hard surfact floors. Brush roll automatic shut-off If something gets caught in the brush rolls, the cleaner will automatically turn off. Slide the 'Custom Control' switch to OFF. Unplug the cleaner. Remove obstruction from brush rolls and coninue cleaning.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
4
Remove label (C) from Custom
Control™ switch.
If label has come off during
assembly, make sure switch is in
OFF (down) position before plug-
ging into electrical outlet.
1-6
1-7
1-9
1. Handle
2. Custom Control™ power
switch
3. Custom Control™
indicator
4. Tool cover
5. Dusting brush
6. Powered hand tool
7. Furniture nozzle
8. Dirt cup
9. Dirt cup handle
10. HEPA cartridge filter
11. Pre-filter
12. Final filter
13. Three position handle
release pedal:
step on
lever to lower handle to
operating or low positions.
14. Nozzle control knob:
slide knob to correct
setting for height of
carpet being cleaned.
15. Furniture guard
16. Headlight
17. Edge groomers
18. Hose
19. Hose holder
20. Cord hooks:
wrap
cord around hooks for
storage.
The top hook
rotates right or left for
easy cord release.
21. Extension wand
22. Crevice wand:
stores
in wand.
C
2-1
Cleaner description
1
2
3
12
13
6
7
8
9
11
10
16
15
14
17
20
19
21
21
5
2. How to use
22
4
18
The assembled cleaner will look like the drawing.
Operate cleaner only at voltage specified on data plate
on bottom of
cleaner.
This cleaner is intended for household use.
Polarized plug
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other).
This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug.
If it still does not fit,
contact a qualified electrician to install the
proper outlet.
Do not change the plug in
any way.
CARPET setting
- turns brush rolls ON, for
cleaning carpets and rugs. (Brush rolls will
automatically stop turning when handle is
raised to upright position.)
BARE FLOOR setting - turns brush rolls
OFF for cleaning hard surfact floors.
Brush roll automatic
shut-off
If something gets caught in the brush rolls,
the cleaner will automatically turn off.
Slide the ‘Custom Control’ switch to OFF.
Unplug the cleaner.
Remove obstruction from brush rolls and
coninue cleaning.
Place hose on holder.
Push screws into holes on back of
handle (Fig. 1-6) and hose holder
(Fig. 1-7).
Tighten screws securely with a
Phillips screwdriver.
1-8
2-2
A
Custom Control™
switch
Plug cord into electrical outlet.