Hoover U9145-900 Manual - Page 17

Storing your cleaner, Lubrication

Page 17 highlights

® Storing your cleaner Disconnect cleaner from electrical outlet. Cord storage 39 Open the tool/cord storage compartment. Wrap the cord in a clockwise direction around the two cord hooks, ending with the plug end at the center of the storage cavity. The plug should not be against the tool so it interferes with closing the door. Fold cleaner to storage position 40 The cleaner can be folded to the storage, or canister position for more compact storage. To fold the Z™ cleaner for storage, grasp and hold the pull ring (A) as you are pushing down and slightly backward on either the telescoping handle/wand or handle grip. It will click when it is locked in place. A Lubrication The cleaner is equipped with bearings that contain sufficient lubrication for the life of the cleaner. The addition of lubricant could cause damage. Therefore, do not add lubricant to any bearings. (Cont'd) ¡ 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

®
17
A
Disconnect cleaner from electrical outlet.
Cord storage
Open the tool/cord storage compartment. Wrap the cord in a clockwise
direction around the two cord hooks, ending with the plug end at the cen-
ter of the storage cavity. The plug should not be against the tool so it interferes
with closing the door.
Fold cleaner to storage position
The cleaner can be folded to the storage, or canister position for more
compact storage. To fold the Z™ cleaner for storage, grasp and hold
the pull ring (A) as you are pushing down and slightly backward on either
the telescoping handle/wand or handle grip. It will click when it is locked in
place.
39
40
The cleaner is equipped with bearings that contain sufficient lubrication for the life of the cleaner. The addition of lubricant could
cause damage. Therefore,
do not add lubricant to any bearings.
Storing your cleaner
Lubrication
(Cont’d)