Hoover UH70005B Manual - Page 4

1-6 B A Position tools D Place smaller diameter end of wand (A) into bottom of rack. Snap wand into clip at top. Repeat with other wand. Crevice tool (B) fits into one of the C extension wands. Snap combination tool (C) and pow- ered hand tool (D) into storage areas on back of cleaner as shown. 2. How to use Cleaner description 2-1 1 2 3 16 4 20 5 19 15 6 18 7 14 8 20 9 13 10 11 1. Handle grip 18. Wands 2. ON/OFF switch 19. Crevice tool 3. Telescoping handle 20. Cord hooks: wrap cord 4. Handle release button around hooks for storage. Top 5. Carrying handle hook can be rotated right or 6. Dirt cup release button left for easy cord release. 7. Dirt cup assembly 21. Handle release pedal: 8. Dirt cup door hinge step on lever to lower handle 9. Stair cleaning handle: to operating or low positions. located below lower edge of dirt cup. 17 10. Headlight Operate cleaner only at 11. Nozzle control knob: voltage specified on data 15 turn knob to correct setting plate on back of cleaner. for height of carpet being cleaned. This cleaner is intended for 12. Furniture guard: helps household use. prevent cleaner from mark- ing furniture. 14 13. Hose handle 14. Combination tool 15. Powered hand tool 16. Hose 17. Hose/tool holder 21 12 Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. ON-OFF switch Plug cord into electrical outlet. To turn cleaner ON, push ON/OFF switch once. To turn cleaner OFF, push switch again. 4 2-2 A Telescoping handle For convenience in storing or carrying your cleaner, the handle is designed to retract into the body of the cleaner. Lower the handle by depressing the button (A) located at the handle base and pushing the handle down. Raise the handle by depressing the button and pulling the handle upward, locking it into the desired position. 2-3 Transporting cleaner To move your cleaner from room to room, put handle in upright position, tilt cleaner back on rear wheels and push forward.