Hoover UH70130 Manual - Page 11
Caution - vacuum model
View all Hoover UH70130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
BRUSHROLL: How to Clean ! CAUTION ! To reduce the risk of injury from moving parts, unplug vacuum before servicing. 4.13 A 4.13 Turn vacuum over so bottom side is facing up. Rotate red upper latch (A) counterclockwise. 4.14 Slide red lower latch (B) to the unlock position. 4.15 Pivot out bottom plate and remove any debris and/or hair from brushroll. 4.16 Reposition bottom plate, aligning the three tabs along front edge of nozzle guard with the three slots in nozzle. Rotate back into position. Slide red lower latch to Lock position, and rotate red upper latch clockwise. 4.15 4.14 B 4.16 HOSE: How to Clean ! CAUTION ! To reduce the risk of injury from moving parts, unplug vacuum before servicing. 4.17 To remove hose for tool use, press the hose release button (A) and pull hose end out. Clear away debris or obstructions from hose. Do not use sharp objects to clean out hose as they can cause damage. To lock back into place, push hose into hose tube until you hear a click. 4.17 A Powered Hand Tool: How to Clean (Tool varies per model) ! CAUTION ! 4.18 A To reduce the risk of injury from moving parts, unplug vacuum before servicing. 4.18 Turn tool so bottom faces up. Rotate the latches (A) on either side of tool. 4.19 Remove bottom plate (B). 4.20 Remove any debris and/ or hair from brushroll. Replace bottom plate by aligning tabs along front edge of tool. Rotate latches back into locked position. 4.19 B 4.20 11 Actual model may vary from images shown.