Hoover UH72630PC Product Manual - Page 13

HOSE: How to Clean ! WARNING ! To reduce the risk of personal injury Unplug before cleaning or servicing 4 16 To remove hose for tool use press the hose release button (A) and pull hose end out Clear away debris or obstructions from hose Do not use sharp objects to clean out hose as they can cause damage To lock back into place push hose into hose tube until you hear a click 4.16 A TURBO TOOL: How to Clean (Tool varies per model) ! CAUTION ! To reduce the risk of injury from moving parts Unplug vacuum before servicing 4 17 Clean the Turbo Tool by removing the two screws (A) located on the bottom cover with a Phillips head screwdriver 4 18 Remove the bottom cover (B) Clean out any debris or hair from the brushroll and turbine fan 4 19 Replace the bottom cover insert and tighten the (2) screws 4.17 A 4.19 4.18 B HEADLIGHT: How to Replace (available on select models only) ! WARNING ! To reduce the risk of electric shock Unplug before cleaning or servicing Removing Lens Press Handle Release Pedal and place handle in low position 4 20 Using a Phillips screwdriver remove (2) screws as shown and lift off lens Installing Bulb 4 21 Pull old bulb straight out of socket Push new bulb straight into socket until locked in place Do not use excessive force when installing bulb Do not twist or turn bulb when installing bulb Replacing Lens 4 22 Reposition lens and secure with screws 4.20 What to Buy: Headlight Additional bulbs may be ordered at Hoover com or call 1 800 944 9200 Ask for Hoover® Part No. 27313-107. Actual model may vary from images shown. 13 4.21 4.22