Hoover WH10100 Manual - Page 6

2. MaintenanCe Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness. Any other servicing should be done by an authorized service representative. ! WARNING ! HIGH VOLTAGE. To reduce the risk of electric shock - unplug Air Purifier before servicing. rinsable Pre-filter The rinsable pre-filter extends the life of your filter made with HEPA media by trapping larger airborne particles before they reach the filter made with HEPA Media. The pre-filter is black in color and is attached to the filter made with HEPA media by hook and loop fastener. We recommend that you inspect the pre-filter once a month to ensure that it is clean and therefore working most effectively. Before inspecting the pre-filter, switch off the unit, and unplug it from the AC outlet. 2.1 When you observe that the pre-filter is becoming clogged and requires cleaning, remove the pre-filter 2.1 FILTER MADE WITH HEPA MEDIA FOAM PRE-FILTER and either gently vacuum it or gently rinse it under a running tap. (NOTE: Do not use any cleaning solutions, as these may damage the pre-filter.) Allow filter to dry. rePlaCeMent of filter Made witH HePa Media Your Air Purifier is equipped with a feature that automatically advises you when your filter made with HEPA Media needs replacement. A red light will illuminate reminding you to change the filter. Replace the filter with Hoover Part Number: AH60010 and then use a paper clip to press the "Filter Reset" button next to the red light. Press and hold until beep occurs and light turns off. To replace the filter made with HEPA media: - Switch off the unit, and unplug it from the AC outlet. - Remove the rear grille and filter made with HEPA media. - Replace the old filter made with HEPA media ensuring that the pre-filter is aligned correctly. - Replace the rear grille. 6