Hotpoint HDA1100NWH Installation Instructions - Page 3
Installation Preparation-Enclosure - parts
UPC - 084691155935
View all Hotpoint HDA1100NWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installation Preparation-Enclosure PREPARE DISHWASHER ENCLOSURE WARNING To reduce the risk of shock, fire, or injury to persons, the installer must ensure that the dishwasher is completely enclosed at the time of installation. • The dishwasher must be installed no more than 10 feet from sink for proper drainage. • The dishwasher must be fully enclosed on the top, sides, and back. • The dishwasher must not support any part of the enclosure. • The rough cabinet opening must have a minimum width and depth of 24" and height of 34-1/2" ± 1/4" #fr2o82mFrtehncehfloor to the underside of the countertop. • The back wall should be free of pipes or wires. • Adjacent cabinets should be square and plumb to ensure a good fit. Refer to Figure A • For a corner installation, allow 2" minimum clearance between the dishwasher and the adjacent wall. • Provide at least 27" in front of the dishwasher to allow the dishwasher door to open fully. Refer to Figure B Figure B Countertop Dishwasher Clearances: In a corner installation, provide at least 2" clearance between the dishwasher and the adjacent cabinet, wall, or other appliance. Provide at least 27" of clearance in front of the dishwasher. 27" Minimum 2" Minimum 05A-1183F ��� �� �� �� ��� Figure A • Make sure the flo�o�r�is��l�e�ve�l�inside the opening and even with the finished floor of the kitchen. This will facilitate removal of the dishwasher at a later date for service, if needed. 3