Hotpoint HDA2100VWW Quick Specs - Page 1

Dishwashers Installation (Pub. 1-G003 pg. 131B) May 12, 1993 Wood Insert Cut-Out Dimensions (in inches) HDA2100V - Hotpoint Built-In DishwasGheEr/Hotpoint/RCA Dishwasher Dimensions (in inches) 25-3/4 MAX. 24 23-3/8 34" MIN. adj. to 35" 21-1/2 3-1/4 4 (Adjustable) 24-3/4 Electrical Rating Voltage AC 120 Hertz 60 Total connected load amperage 8.6 Calrod® heater watts max 500 For use on adequately wired 120-volt, 15-amp circuit having 2-wire service with a separate ground wire. This appliance must be grounded for safe operation. Door insert Access insert B Countertop A Panel Thickness 3/4 Front 90° 24" MIN. This wall area must be free of pipes or wires 4 4 90° Electrical wiring is of 4 Panel Hot 5 5 3" from cabinet C 1-1/2 1/2 water line on left 34" to 34-3/4" Underside 6 of countertop to floor 2 6 Plumbing and electrical service must enter Electrical wiring on right 1/4 inside shaded area 19" MIN. from wall 24" From wall When using GPF325 1/4" custom dishwasher door and access panel kit. When using GPF375 3/4" custom dishwasher door and access panel kit. Kit GPF325 GPF375 A 18-7/8" 18-15/16" B 23-9/16" 23-5/8"* C 3-11/16" 4-1/4" to 3-3/4"** Panel Thickness 1/4" 3/4" * Bottom of panel must be notched 1-1/2" x 1/2" to clear across panel ** Adjustment required to match adjacent cabinet fronts due to leveling leg adjustment, 4" nominal 24" MIN. Note: Dishwasher must not be installed more than 10 feet from sink for proper drainage. All plumbing and electrical work must be in accordance with local codes. Dishwasher includes drain hose and leveling legs. Installation Information: Before installing, consult installation instructions packed with product for ­current dimensional data. Specification Created 4/11 450160 As an Energy Star® partner, GE has determined that this product meets the Energy Star guidelines for energy efficiency. Listed by Underwriters Laboratories