Hotpoint HDA2160HSS Use and Care Manual - Page 9

Operation of models with cycle dial

Get Hotpoint HDA2160HSS PDF manuals and user guides View all Hotpoint HDA2160HSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Operation of models with cycle dial GEAppliances.com Rinse Only For rinsing partial loads that will be washed later. Do not use detergent. 1 Make sure HEATED DRY is not selected. 3 Slowly turn the Dial to RINSE ONLY. 2 Be sure the door is unlatched. 4 Latch the door to start the cycle. Plate Warmer or Drying For warming clean dishes and serving plates. This cycle will take approximately 39 minutes. 1 Load clean dishware to be warmed. 2 Select HEATED DRY ON. 3 Be sure the door is unlatched. 4 Slowly turn the Dial to PLATE WARMER or DRYING. 5 Latch the door to start the cycle. Hot Start or Hot Prestart Option Preheats wash water. 1 Select the HOT START or HOT PRESTART cycle and any other option on the push button pad. 2 Be sure the door is unlatched. 3 Slowly turn the Dial to HOT START or HOT PRESTART. 4 Latch the door to start the cycle. Short Wash or Light Wash or Water Saver For quickly washing loads of everyday dishes with light to medium soils that have not dried on. 1 Be sure the door is unlatched. 2 Slowly turn the Dial to SHORT WASH, LIGHT WASH or WATER SAVER. 3 Latch the door to start the cycle. Start (Models with a Dial) Slowly turn the Dial to the START or ON position, or the selected cycle. Don't turn it past the START, ON or cycle position; you could accidentally miss a prewash. There is a time delay between start-up and water fill so you will not hear any wash action right away. „ Latch the door to begin the cycle. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Start
(Models with a Dial)
Slowly turn the Dial to the
START
or
ON
position, or the selected cycle. Don’t turn it past the
START
,
ON
or cycle position; you could accidentally miss a prewash.
There is a time delay between start-up and water fill so you will not hear any wash action right
away.
Latch the door to begin the cycle.
9
Operation of models with cycle dial
GEAppliances.com
Rinse Only
For rinsing partial loads that will be washed later.
Do not use detergent.
1
Make sure
HEATED DRY
is not selected.
3
Slowly turn the Dial to
RINSE ONLY.
2
Be sure the door is unlatched.
4
Latch the door to start the cycle.
1
Be sure the door is unlatched.
2
Slowly turn the Dial to
SHORT WASH,
LIGHT WASH
or
WATER SAVER.
3
Latch the door to start the cycle.
Plate Warmer or Drying
1
Load clean dishware to be warmed.
2
Select
HEATED DRY ON.
3
Be sure the door is unlatched.
4
Slowly turn the Dial to
PLATE WARMER or
DRYING.
5
Latch the door to start the cycle.
Hot Start or Hot Prestart Option
Preheats wash water.
1
Select the
HOT START
or
HOT PRESTART
cycle and any other option on the push
button pad.
2
Be sure the door is unlatched.
3
Slowly turn the Dial to
HOT START
or
HOT PRESTART
.
4
Latch the door to start the cycle.
For warming clean dishes and serving plates. This cycle will take approximately 39 minutes.
Short Wash or Light Wash or Water Saver
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.