Hotpoint HPS16BTNRWW Use and Care Manual - Page 18
Re-hanging The Doors, Re-hanging The Doors Cont.
View all Hotpoint HPS16BTNRWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
INSTALLATION INSTRUCTIONS Installation Instructions REVERSING THE DOOR SWING (Cont.) 6 RE-HANGING THE DOORS 6.1 Re-hang the fresh food door 6.1.1 Lower the fresh food door onto the bottom hinge pin. Be sure the washer is in place on the pin. 6 RE-HANGING THE DOORS (Cont.) 5HKDQJWKHIUHH]HUGRRU /RZHUWKHIUHH]HUGRRURQWRWKHFHQWHU hinge pin. Be sure the washer is in place on the pin. Hinge Pin Plastic Washer 6.1.2 Tilt the door towards the cabinet. As the door is brought into position, align the socket in the door with the hole in the center hinge. Place the center hinge pin into the hole in the center hinge and tighten. Make sure the washer is on the top of the hinge pin. Hinge Pin with Washer Center Hinge Hinge Pin Plastic Washer 6.2.2 Tilt the door towards the cabinet, lifting the top hinge so the pin fits into the socket on the top of the door. 6.2.3 Make sure the door is slightly above the top of the cabinet and the gap between the doors is even across the IURQW7LJKWHQWKHWRSKLQJHVFUHZV'R not over-tighten these screws. Tighten them until they are just snug, and then turn them another one-half turn. Top Hinge 18 Hinge Gap 49-1000478 Rev. 1