Hotpoint HTX21EASKWW Installation Instructions - Page 20
Remove and swap the 2 plastic caps and the 2
View all Hotpoint HTX21EASKWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installation Instructions REVERSING THE DOOR (cont.) B REVERSING THE DOOR - GLASS PANEL DOOR MODELS (cont.) 6 Remove and swap the 2 plastic caps and the 2 hinges. Install plastic caps from oposite side here Install hinges from oposite side here Plastic caps Inner door B REVERSING THE DOOR - GLASS PANEL DOOR MODELS (cont.) 8 Mount the assembled door on the 2 upper left side hinge screws installed in step 2. Move the hinge screws loosened in step 2 into the lower left side screw holes and firmly tighten all 4 screws. Hang door and tighten screws Door Hinges 7 Rotate the outer door 180 degrees, mount the inner door back into the outer door frame and secure with the screws removed in step 5. Make sure you mount the hinges on the side opposite the pocket. Pocket screws Inside screws Door hinge screws Inside screw Inside screw Inside screw Inner door Outer door Inside screw Rotate outer door 180° 9 Install the 4 plastic caps removed in step 1 into the 4 right side front panel holes. Plastic Cap (4) Right side of front panel NOTE: To return the door to the original setup, follow these instructions, swapping "left" and "right". When you finish Plug the dryer back into its electrical outlet. 20