Hotpoint RB526DHWW Use and Care Manual - Page 15
Using the clock and timer.
View all Hotpoint RB526DHWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Using the clock and timer. Not all features are on all models. Clock (on some models) 12 The clock on your range is powered by the range itself. No batteries are necessary. The time is displayed with no timer or audible alarm. 9 3 To set the clock, turn the stem left or right. To clean the clock, see instructions on page 23. For any repairs, call a qualified service 6 technician. GEAppliances.com Not all features are on all models. Make sure the clock is set to the correct time of day. To Set the Clock The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a delayed cooking or a delayed self-cleaning cycle. Touch the Clock pad twice. For models without a Clock pad: Hold the + and - pads for 3 seconds. Touch the + or - pads. If the + or - pads are not touched within one minute after Step 1, the display reverts to the original setting. If this happens, repeat Step 1 and reenter the time of day. Touch the Start/On pad until the time of day shows in the display. This enters the time and starts the clock. To check the time of day when the display is showing other information, simply touch the Clock pad. The time of day shows until another pad is touched. To Turn Off the Clock Display If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your range. Touch the Clock pad once to turn off the time of day display. Although you will not be able to see it, the clock maintains the correct time of day. Touch the Clock pad twice to recall the clock display. For models without a Clock pad: Touch the Bake and Broil Hi/Lo pads at the same time until the display shows SF. Touch the Timer pad. The display will show ON (Clock display on). Touch the Timer pad again until the display shows OFF (Clock display off). Touch the Start/On pad to leave the control set in this mode. NOTE: If the clock cannot be recalled or it will not stay permanently displayed, the Energy Saver Mode feature is on. To turn the feature off, see the Energy Saver Mode section. 15