Hotpoint RB787DPWW Quick Specs - Page 1

RB787DP- Hotpoint 30" Free-Standing Electric Range Dimensions (in inches) 29-7/8 2-1/4 7-1/2 REAR WALL 7-1/2 7 3-1/2 CENTER LINE 5 2-1/4 Amp Rating 240V 10.5 208V 7.9 Breaker Size 40 Amps† †Note: Check local codes for required breaker size. 46-7/8 Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a 4-conductor 1/4† †The range may be placed with 290-"7c/le8arance (flush) at the back wall and side walls if the range side trims extend beyond the cabinet fronts at least 1/4". Self-Clean models only connection to an electric range. Note: 30" Electric Ranges conform to U.L. requirements for 0" spacing from walls below countertops. Allow 1-1/2" spacing from the side of the range to adjacent vertical walls above the cooktop surface. Receptacle Locations: Locally approved flexible service cord or ­conduit must be used because terminals are not accessible 26-3/8* 46-1/2 after range ­installation. See shaded area in drawing for location of electrical outlet box. Recom­mended outlet locations allow 46-3/8 † The ran1g/e4†may be placed withra0n"gceletoabreanincsetalled directly against rear wall. (flush) at the back wall and sidIenswtaallllsatiifotnheInformation: Before installing, consult installation range side trims extend beyonidnstthruectcioanbsinpaectked with product for ­current dimensional data. *Dimension from wall to front of closedfroovnetnsdaotolre. ast 1/4". Self-clean models only. Dimension from wall to door handle is 28-1/2". th2e6fr-o3n/t8o*f closed oven All Hotpoint ranges are equipped * Dimension from wall to front of closed ovendoor. SpecifiDcaimtioennRseiovnisferdom4/0w9 all to the front of closed oven is 28-1/2" 46-3/8 with an Anti-Tip device. The installation of this device is an important, required step in the installation of the range. Listed by Underwriters Laboratories 420411