Hotpoint RB787WHWW Use and Care Manual / Warranty - Page 6
Using the surface units. - manuals
UPC - 084691087830
View all Hotpoint RB787WHWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions Using the surface units. Throughout this manual, features and appearance may vary from your model. Be sure you turn the control knob to Off when you finish cooking. How to Set Push the knob in and turn in either direction to the setting you want. At both Off and Hi the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set. Indicator Lights (on radiant glass models only) A HOT SURFACE or HOT COOKTOP (depending on model) indicator light will glow when any radiant element is turned on and will remain on until the surface is cool enough to touch. A SURFACE UNIT on or BURNER ON (depending on model) indicator light will glow when any surface unit is on. NOTE: The SURFACE UNIT or BURNER ON indicator light may glow between the surface control settings of Lo and Off, but there is no power to the surface units. On some models. Dual Surface Unit and Control Knob (on some models) The right front surface unit has 2 cooking sizes (6" and 9" or 9" and 12") to select from so you can match the size of the unit to the size of the cookware you are using. To use the small surface unit, turn the control knob counterclockwise to the SMALL BURNER settings. To use the large surface unit, turn the control knob clockwise to the LARGE BURNER settings. On some models. 6