Hotpoint RGB745DEPCT Installation Instructions - Page 17

Clock and Timer, Consumer Support, Installation, Instructions, Troubleshooting Tips

Page 17 highlights

Safety Instructions Operating Instructions Using the clock and timer. GEAppliances.com Not all features are on all models. To Set the Clock The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a delayed cooking or a delayed self-cleaning cycle. Touch the Clock pad twice. Touch the + or - pads. Touch the Start/On pad until the time of day shows in the display. This enters the time and starts the clock. To check the time of day when the display is showing other information, simply touch the Clock pad. The time of day shows until another pad is touched. Make sure the clock is set to the correct time of day. If the + or - pads are not touched within one minute after you touch the Clock pad, the display reverts to the original setting. If this happens, touch the Clock pad twice and reenter the time of day. To Turn Off the Clock Display If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your range. Touch the Clock pad once to turn off the time of day display. Although you will not be able to see it, the clock maintains the correct time of day. Touch the Clock pad twice to recall the clock display. The timer is a minute timer only. The Clear/Off pad does not affect the timer. To Set the Timer The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes. Touch the Kitchen Timer On/Off pad. Touch the + or - pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes. If you make a mistake, touch the Kitchen Timer On/Off pad and begin again. Touch the Start/On pad. The time will start counting down, although the display does not change until one minute has passed. When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the Kitchen Timer On/Off pad is touched. Installation Instructions Troubleshooting Tips Consumer Support 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

Not all features are on all models.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the
Kitchen Timer On/Off
pad.
Touch the
+
or
pads until the amount
of time you want shows in the display.
The maximum time that can be entered
in minutes is 59. Times more than
59 minutes should be changed to
hours and minutes.
If you make a mistake, touch the
Kitchen
Timer On/Off
pad and begin again.
Touch the
Start/On
pad. The time will
start counting down, although the
display does not change until one
minute has passed.
When the timer reaches
:00,
the control
will beep 3 times followed by one beep
every 6 seconds until the
Kitchen Timer
On/Off
pad is touched.
The timer is a minute timer only.
The
Clear/Off
pad does not affect the
timer.
Using the clock and timer.
GEAppliances.com
To Set the Clock
The clock must be set to the correct time of
day for the automatic oven
timing functions
to work properly. The time of day cannot be
changed during a delayed cooking or a
delayed self-cleaning cycle.
Touch the
Clock
pad twice.
Touch the
+
or
pads.
If the
+
or
pads are not touched within one
minute after you touch the
Clock
pad, the
display reverts to the original setting. If this
happens, touch the
Clock
pad twice and
reenter the time of day.
Touch the
Start/On
pad until the time of
day shows in the display. This enters the
time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
Clock
pad. The time of day shows until
another pad is touched.
Make sure the clock is set to the correct
time of day.
Consumer Support
Installation
Instructions
Troubleshooting Tips
Operating Instructions
Safety Instructions
17
To Turn Off the Clock Display
If you have several clocks in your kitchen,
you may wish to turn off the time of day
clock display on your range.
Touch the
Clock
pad once to turn off the
time of day display. Although you will
not be able to see it, the clock maintains
the correct time of day.
Touch the
Clock
pad twice to recall the
clock display.