Hoveround HOVERLIFT for Vehicles User Manual - Page 26

Opening the Swing Away Arm

Page 26 highlights

HoverliftManual-RevC 7/8/13 1:01 PM Page 26 • Do not use the swing away arm if any of the components are worn, damaged or not working properly. Call Hoveround Technical support if repairs are needed. • Always have a clear safe path, away from traffic hazards when using the swing away arm. • Always remove any obstacles in the path of the swing away arm before unlatching and using the swing away arm. • Always make sure the swing away arm is open, away from your body and stationary before attempting to access the rear of the vehicle. • Only drive the vehicle when the swing arm is closed and the safety pin and latching mechanism are securely in place. Opening the Swing Away Arm Fold the platform to the up position and raise until it locks in place as pictured (see Figure 5A). 26 Chapter 5 Figure 5A 1. Hold In Place Here 2. Pull Red Knob To Release D82012364 REV C 6/17/13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

26
Chapter 5
D82012364
REV C
6/17/13
Do not use the swing away arm if any of the components
are worn, damaged or not working properly. Call Hoveround
Technical support if repairs are needed.
Always have a clear safe path, away from traffic hazards
when using the swing away arm.
Always remove any obstacles in the path of the swing away
arm before unlatching and using the swing away arm.
Always make sure the swing away arm is open, away from
your body and stationary before attempting to access the
rear of the vehicle.
Only drive the vehicle when the swing arm is closed and the
safety pin and latching mechanism are securely in place.
Figure 5A
1. Hold In Place
Here
2. Pull Red Knob
To Release
Opening the Swing Away Arm
Fold the platform to the up position and raise until it locks in place as pictured (see
Figure 5A).
HoverliftManual-RevC
7/8/13
1:01 PM
Page 26