Huawei MT883 Quick Start Guide - Page 5

Configuring the MT883

Get Huawei MT883 PDF manuals and user guides View all Huawei MT883 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

3 Configuring the MT883 After you enable the embedded dial-up function of the MT883, when the MT883 is not used for the network access, power off the MT883. Otherwise, even if you have shut down your computer, the network operator may still charge you for the network access. Step 1 Log in to the Web configuration page. 1. Launch the Internet Explorer on the computer. Enter http://192.168.1.1 in the address bar and press Enter. 2. In the displayed dialog box, enter the user name and the password, and then click OK. By default, both the user name and the password are admin. After the password is verified, you can access the Web configuration page. Step 2 Enable the embedded dial-up function. 1. In the navigation tree on the left of the Web Configurator, choose Basic > WAN Setting. 2. Select a PVC number, such as 1, from the PVC drop-down combo box. 3. Enter the VPI and VCI parameters that are provided by the network operator in the VPI and VCI text boxes. 4. Select Yes from the Active drop-down combo box and select Routing from the Mode drop-down combo box. 5. Enter the user name and password that are provided by the network operator in the Username and Password text boxes , keep the default settings of other parameters. 6. Click Submit to save the settings. After you complete the preceding settings, you can surf the Internet. You need to perform the preceding operations on a computer only once. The next time when you power on the computer, you can surf the Internet without performing any configuration. 4 Indicators Indicator POWER Status On Off Description The MT883 is powered on. The MT883 is powered off. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
3
Configuring the MT883
After you enable the embedded dial-up function of the MT883, when the
MT883 is not used for the network access, power off the MT883.
Otherwise, even if you have shut down your computer, the network
operator may still charge you for the network access.
Step 1
Log in to the Web configuration page.
1.
Launch the Internet Explorer on the computer. Enter
in
the address bar and press
Enter
.
2.
In the displayed dialog box, enter the user name and the password, and then
click
OK
.
By default, both the user name and the password are
admin
. After the password is
verified, you can access the Web configuration page.
Step 2
Enable the embedded dial-up function.
1.
In the navigation tree on the left of the Web Configurator, choose
Basic
>
WAN Setting
.
2.
Select a PVC number, such as
1
, from the
PVC
drop-down combo box.
3.
Enter the VPI and VCI parameters that are provided by the network operator
in the
VPI
and
VCI
text boxes.
4.
Select
Yes
from the
Active
drop-down combo box and select
Routing
from
the
Mode
drop-down combo box.
5.
Enter the user name
and password that are provided by the network
operator in the
Username
and
Password
text boxes , keep the default settings
of other parameters.
6.
Click
Submit
to save the settings.
After you complete the preceding settings, you can surf the Internet.
You need to perform the preceding operations on a computer only once. The next time
when you power on the computer, you can surf the Internet without performing any
configuration.
4
Indicators
Indicator
Status
Description
On
The MT883 is powered on.
POWER
Off
The MT883 is powered off.
5