Humax DT9500CI User Manual
Humax DT9500CI Manual
 |
View all Humax DT9500CI manuals
Add to My Manuals
Save this manual to your list of manuals |
Humax DT9500CI manual content summary:
- Humax DT9500CI | User Manual - Page 1
- Humax DT9500CI | User Manual - Page 2
manual next to your product for future reference. Throughout the whole manual, Note indicates additional product operation information to make the user aware of possible problems Copyright © 2006 HUMAX Corporation ** Not to be copied, used or translated in part or whole without HUMAX's prior consent - Humax DT9500CI | User Manual - Page 3
cable must be earthed to the system earth for the satellite dish. • Place the product indoors to avoid exposing ventilation and that you have followed the manufacturer's instructions for mounting. Do not place the product on required, be sure the service technician uses replacement parts specified - Humax DT9500CI | User Manual - Page 4
Contents 1. Before Using the Product GB5 1.1 Package Contents GB5 1.2 Front Panel GB6 1.3 Rear Panel GB7 1.4 Conditional Access GB8 1.5 Remote Control GB10 2. Setup ...GB12 2.1 Connecting Antenna/TV/VCR GB12 2.2 Connecting Audio System GB15 2.3 Powering On GB16 3. Basic Operation GB17 3.1 - Humax DT9500CI | User Manual - Page 5
GB38 8.2 Setting Property of Channel GB39 8.3 Favourite List GB40 9. Utility ...GB41 10. Programme Guide GB42 11. Mail ...GB44 12. Conditional Access GB45 13. Common Interface GB46 14. Software Upgrade GB47 14.1 OTA (Over the Air GB47 15. Troubleshooting GB49 16. Specification GB51 GB 4 - Humax DT9500CI | User Manual - Page 6
- Humax DT9500CI | User Manual - Page 7
- Humax DT9500CI | User Manual - Page 8
1.3 Rear Panel ** ** 1. LNB IN ** Connects to a satellite antenna cable. ** 2. LNB OUT ** Connects to another digital Set-Top Box. ** 3. RS-232C ** Connects to your PC to update software. ** 4. TV SCART ** Connects a TV SCART cable. ** 5. VCR SCART ** Connects a VCR SCART cable. ** 6. VIDEO ** - Humax DT9500CI | User Manual - Page 9
1. Before Using the Product 1.4 Conditional Access Although some TV and radio channels are free to air, most TV and radio/music channels are available on a subscription basis and can only be enjoyed via Conditional Access component. ** 1. Inserting Smartcard ** A Smartcard looks similar to a credit - Humax DT9500CI | User Manual - Page 10
2. Inserting CI (Common Interface) Module ** Your product is equipped with a slot for Common Interface (CI). ** 1. Open the right-hand flap on the front panel of the product. 2. Insert the Smartcard into the CI module, and the CI module into the slot. ** GB 9 - Humax DT9500CI | User Manual - Page 11
. ** 2. MODE ** Switches between DIGITURK and OTHER modes. ** 3. NUMERIC BUTTONS ** Enter a TV/radio channel number. ** 4. GUIDE (EPG) ** Displays the programme guide. ** 5. i (INFORMATION) - WHITE ** Displays the information about the channel and programme. ** 6. ARROW BUTTONS ** Changes channels - Humax DT9500CI | User Manual - Page 12
9. CH-/CH+ ** Changes the channel. ** 10. PP (Recall) ** Returns to the previous channel in each mode. ** 11. FREEZE ** Freezes the scene you are watching. Does not cease audio. ** 12. WIDE ** Changes the display format. ** 13. STANDBY ** Switches between operation and standby modes. ** 14. OPTS ** - Humax DT9500CI | User Manual - Page 13
you connect the product to any other equipment, you must disconnect all equipments from their power sources. Note: If you encounter any problem when setting up the product, please contact your local product distributor. 2.1 Connecting Antenna/TV/VCR 1. Using SCART Cable ** ** 1. Connect the antenna - Humax DT9500CI | User Manual - Page 14
2. Using RCA Cable ** ** 1. Connect the antenna to the LNB IN of the product. 2. The RCA cable is connected as in the figure above. GB 13 - Humax DT9500CI | User Manual - Page 15
2. Setup 3. Using RF Cable ** ** 1. Connect the antenna to the LNB IN of the product. 2. The RF cable is connected as in the figure above. ** Note: The default UHF channel is 36. GB 14 - Humax DT9500CI | User Manual - Page 16
2.2 Connecting Audio System ** ** 1. Connect the optical S/PDIF terminal and Dolby Digital decoder to listen to higher quality sound. 2. Connect VIDEO on the product and VIDEO IN on the TV using the RCA cable. 3. Connect AUDIO L/R on - Humax DT9500CI | User Manual - Page 17
- Humax DT9500CI | User Manual - Page 18
3. Basic Operation 3. Basic Operation 3.1 Installation Wizard When powering on your product for the first time after purchase, the selecting country screen is automatically displayed. Select the required country using the button and press the OK button. If you select "Turkey", the DIGITURK - Humax DT9500CI | User Manual - Page 19
channel using the CH-/CH+, or NUMERIC buttons. You can also use the Channel List or Programme Guide. You can adjust the audio volume using the V-/V+ or ** Banner (Programme Information) button. The any teletext information. ** Displayed only when the programme is braodcast in Dolby Digital. - Humax DT9500CI | User Manual - Page 20
3.3 Subtitle If the current programme provides subtitle information, the subtitle icon will appear on the banner. You can select the language for the subtitle using the TXT (SUBTITLE) button. You can select a default subtitle language in MENU-System Settings-Language Setting-Subtitle Language. ** - Humax DT9500CI | User Manual - Page 21
3. Basic Operation 3.5 Teletext ** When the channel supports teletext, the teletext icon is displayed on the banner. To enter Teletext mode, use the TXT (SUBTITLE) button to display teletext. To display teletext menu, - Humax DT9500CI | User Manual - Page 22
4. Menu Map 4. Menu Map ** GB 21 - Humax DT9500CI | User Manual - Page 23
4. Menu Map Menu structure varies according to the item and its operation. You can easily navigate the menu using the following instructions: ** 1. Press the OPTS button to display the main menu screen. ** 2. Select the item you want using the button. ** 3. Press the OK button to move from a - Humax DT9500CI | User Manual - Page 24
5. Installation 5. Installation 5.1 DIGITURK 1. DIGITURK Installation You can automatically search the channel without entering any other information. 2. Change CAS Slot of All DIGITURK Channels You can check the CAS slot currently in use and change the CAS slot of all DIGITURK channels. - Humax DT9500CI | User Manual - Page 25
select "Enabled". Otherwise, select "Disabled". • DiSEqC Input: If you are using DiSEqC (Digital Satellite Equipment Control) switch to connect multiple antennas or LNBs, select DiSEqC input to connect to antenna you complete the settings, press the OK button to move to the Manual Search menu. GB 24 - Humax DT9500CI | User Manual - Page 26
2. Manual Search You can search channels of the selected satellite by transponders using the transponder information. ** • Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for - Humax DT9500CI | User Manual - Page 27
, this is used to fine-tune the position of the motor. In installer mode, this is used to search for the position of the satellite manually. • Motor Control: You can select one option among "Search", "Go to", "Store" or "Reset". ** - Search: Searches for channels on the selected transponder. - Go to - Humax DT9500CI | User Manual - Page 28
OK button. You will see a warning message. To continue the procedure, press the OK button. To set the motor position for each satellite manually, select the Satellite Name, set DiSEqC Command Mode to "Installer", and then set Movement to one option among "East", "Stop" or "West". The motor starts - Humax DT9500CI | User Manual - Page 29
has different combinations of settings for search. The Satellite Name is automatically displayed. Antenna Alternative 16 is If you want to search channels through all field of tuner (950~2150MHz), select "Manual". Otherwise, select "Auto" to search channels with the preset parameters. In detail mode, - Humax DT9500CI | User Manual - Page 30
5.3 Organise Channels 1. Organise All Channels You can edit TV or radio channels using Organise TV/Radio Channels (MENU-Installation-Organise Channels-Organise TV/Radio Channels-Organise All Channels). You will be prompted to enter the PIN code. The default PIN code is "0000". Before leaving - Humax DT9500CI | User Manual - Page 31
5. Installation 2. Organise Favourite A~B You can add channels to Favourite groups using Organise Favourite TV/Radio Channels (MENU-Installation-Organise Channels-Organise TV/Radio Channels-Organise Favourite A~B). Before leaving Organise Favourite TV/Radio Channels screen, you will be prompted to - Humax DT9500CI | User Manual - Page 32
the right side. You can move the highlighter in order of Satellite List, Transponder List and Channel List using the button. You can move the highlighter in reverse direction using the button. You can select a satellite in Satellite List or transponder in Transponder List using the button. Press - Humax DT9500CI | User Manual - Page 33
5. Installation 5.4 Factory Settings You can restore the product to the factory settings using the Factory Settings menu (MENU-Installation-Factory Settings). You will be prompted to enter the PIN code. The default PIN code is "0000". For more information, refer to 5.1.1 DIGITURK Installation. - Humax DT9500CI | User Manual - Page 34
6. System Settings 6. System Settings The System Settings menu (MENU-System Settings) lets you customise your product according to your perference. 6.1 Language Setting You can set the default language for menu, audio and subtitle. ** 6.2 Time and Date Setting You can set the current time and turn - Humax DT9500CI | User Manual - Page 35
according to the screen ratio, select the TV standard and set the NTSC mode. Note: You can choose the Dolby Digital audio stream whenever possible by selecting "ON" in the Dolby Digital setting. 6.4 UHF Tuning You can select UHF Channels for your TV and adjust fine tuning setting. The channel range - Humax DT9500CI | User Manual - Page 36
6.5 Other Setting You can adjust the transparency level of On-Screen Display (OSD), set the duration of the banner when switching channels, select automatic or manual mode for changing to reserved channel and set the duration of the reminder. GB 35 - Humax DT9500CI | User Manual - Page 37
6. System Settings 6.6 System Information The System Information menu (MENU-System Settings-System Information) provides information such as STB status, signal level of channel and software upgrade. Note: • You can also display STB Status by pressing i and OK button. • For more information about - Humax DT9500CI | User Manual - Page 38
7. Parental Control 7. Parental Control The Parental Control menu (MENU-Parental Control) lets you control the access to programmes by programme rating. Note: Enter the PIN code using the NUMERIC buttons. The default PIN code is set to "0000". 7.1 Parental Rating Set Parental Rating by age level. " - Humax DT9500CI | User Manual - Page 39
the COLOUR button to display the corresponding channel list. RED (All channel list), GREEN (Favourite channel list), YELLOW (Network channel list), BLUE (Satellite channel list), WHITE (Alphabet channel list) 3. Select a channel using the , CH-/CH+ or NUMERIC buttons and press the OK button to - Humax DT9500CI | User Manual - Page 40
the channel list using the MENU-Channel List-Simple (or Advanced). You can select the type of the channel lists (All, Favourite, Network, Satellite, Alphabet) by pressing the COLOUR button. 2. Press the OPTS button while the channel list is displayed. 3. Select an option (Favourites/Lock or Unlock - Humax DT9500CI | User Manual - Page 41
8. Channel List 8.3 Favourite List You can check and edit Favourite list quickly and easily. 1. Press the FAV button to display Favourite list while watching a programme. 2. Press the RED button to display the all channel list. Select the channel you want to add to Favourite list and press the OK - Humax DT9500CI | User Manual - Page 42
return to the previous menu. 3. Games You can select games using the the screen. button. Use the , OK, COLOUR or BACK button according to the instructions displayed on GB 41 - Humax DT9500CI | User Manual - Page 43
watch or reserve it. You can go to the programme guide screen by just pressing the GUIDE button or by using MENU-EPG. To close the guide screen, press the GUIDE or BACK button. ** You can navigate the guide using the following instructions: • Press the RED button to display the current or next - Humax DT9500CI | User Manual - Page 44
time, you will be prompted to enter your PIN code to complete the reservation. • Press the MODE button to switch between DIGITURK and TV Guide. • Press i button in the selected programme to view the detail information. And you can also make a reservation in the detail information screen. GB 43 - Humax DT9500CI | User Manual - Page 45
11. Mail 11. Mail You receive mails sent by broadcasting company. When a new mail arrives, the envelope icon will appear on the screen. Sometimes a new message will be directly displayed on - Humax DT9500CI | User Manual - Page 46
12. Conditional Access 12. Conditional Access You can check the information of Internal or External Smartcard using the MENU-Conditional Access. GB 45 - Humax DT9500CI | User Manual - Page 47
13. Common Interface 13. Common Interface You can check the information of CI module using the MENU-Common Interface. GB 46 - Humax DT9500CI | User Manual - Page 48
. Note that OTA is only limited to certain geographical regions mainly due to different antennas having different footprints(area where the signal can be received). The software update via satellite will only occur under the following circumstances. ** 1. The equipment should have appropriate loader - Humax DT9500CI | User Manual - Page 49
Select Automatic Search to search pre-defined DIGITURK TPs for new software automatically. When new software is available to download, the product will be automatically powered off and on. If new software is not found by automatic update, use manual update. For more information about how to set the - Humax DT9500CI | User Manual - Page 50
Troubleshooting 15. Troubleshooting Before contacting your local service, please read the following instructions. If the product does not work normally after completing the following troubleshooting, please contact your local product distributor or service weather. - Change satellite dish into a - Humax DT9500CI | User Manual - Page 51
15. Troubleshooting 5. Remote control does not operate - To manipulate the equipment with the remote control, its emitting part should directly point towards its receiving part of the product. - Check the battery of the remote control. ** 6. Reservation is unavailable - Check if it is not overlapped - Humax DT9500CI | User Manual - Page 52
VCR SCART S/PDIF Video Output (CVBS, RGB, S-Video) Audio Output Video Output (CVBS, S-Video) Video Input (CVBS, RGB, S-Video) Audio Output Digital Audio Output, Fiber-Optic (Resolution: 20 bits) Power Supply Input Voltage Type Power Consumption Protection AC 90 ~ 250V, 50/60Hz Switching Mode