Humax iCordHD User Manual

Humax iCordHD Manual

Get Humax iCordHD PDF manuals and user guides View all Humax iCordHD manuals
Add to My Manuals
Save this manual to your list of manuals

Humax iCordHD manual content summary:

  • Humax iCordHD | User Manual - Page 1
    HD Digital Recorder The default password is 0000. User's Manual Bedienungsanleitung iCord HD
  • Humax iCordHD | User Manual - Page 2
    to your product for future reference. The information in this user's manual is subject to change without notice. Copyright (Copyright © 2008 HUMAX Corporation) Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and
  • Humax iCordHD | User Manual - Page 3
    manual aware of possible problems and information of any servicing to qualified service personnel. This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Instruction
  • Humax iCordHD | User Manual - Page 4
    Please read the following safety precautions carefully. Safety Instructions and Precautions 1. MAINS SUPPLY 90-250V a.c., EARTHING • The LNB cable must be earthed to the system earth for the satellite dish. 10. LOCATION • Place the product indoors to avoid exposing it to lightning GB3 User's Manual
  • Humax iCordHD | User Manual - Page 5
    , ensure that there is adequate ventilation and that you have followed the manufacturer's instructions for mounting. • Do not place the product on an unstable cart, stand replacement of parts is required, be sure the service technician uses replacement parts specified by the manufacturer or Manual
  • Humax iCordHD | User Manual - Page 6
    4.8 Teletext GB31 4.9 Programme Information (i-plate GB31 4.10 Multifeed GB33 5. Channel List GB34 5.1 My TV List GB34 5.2 Favourite List GB36 5.3 Satellite List GB36 5.4 Pay-TV GB37 6. TV Guide GB38 6.1 Using TV Guide GB38 6.2 Highlights GB39 6.3 Schedule GB40 6.4 Find GB41 GB5 User
  • Humax iCordHD | User Manual - Page 7
    GB98 13.1 OTA (Over the Air GB98 14. Appendix GB99 14.1 Menu Map GB99 14.2 Trouble Shooting GB100 14.3 Error Message GB102 14.4. Specification GB104 14.5 Glossary GB106 14.6 Service and Support GB109 14.7 Remote Control Code List GB111 14.8 OPEN SOURCE SOFTWARE NOTICE GB123 14.8 OPEN
  • Humax iCordHD | User Manual - Page 8
    instructions on the product and its accessories. 1.1 Package Contents Please check all package contents before using your product. Batteries User's Manual User's Manual to area. Caution: • The company shall not be liable for problems caused by changing hard disk drive by user. • The company shall
  • Humax iCordHD | User Manual - Page 9
    memory or external HDD. 8. CI-MODULE SLOT A slot for CI-Modules. Note: The front of the product is subject to change without notice. GB8 User's Manual
  • Humax iCordHD | User Manual - Page 10
    is needed to decode the channels. 1. Open the right-hand flap on the front panel of the product to expose the card slot. 2. Follow the instructions of the module and insert the Smartcard into the CI module. 3. Keep the CI module (with the Smartcard) horizontal. 4. Insert the CI module into the
  • Humax iCordHD | User Manual - Page 11
    10 11 12 13 1. LNB 1 IN, LNB 2 IN Connects a satellite antenna cable. Up to two cables can be connected. 2. LNB 1 OUT Connects another digital satellite receiver. 3. ETHERNET Ethernet port (for future use). 4. TV SCART Connects to the product is subject to change without notice. GB10 User's Manual
  • Humax iCordHD | User Manual - Page 12
    to the live programme. f. PAUSE Pauses the live programme or recording. 5. STANDBY Switches between operation and standby modes. 6. MENU Displays the main menu. GB11 User's Manual
  • Humax iCordHD | User Manual - Page 13
    favourite channel list in normal viewing mode. i. YELLOW Displays the satellite channel list in normal viewing mode. j. BLUE Displays the (INFORMATION) Displays the channel and programme information. 13. GUIDE Displays the programme guide. 14. OK/LIST Selects a menu or confirms the User's Manual
  • Humax iCordHD | User Manual - Page 14
    BOOKMARK Saves the current viewing position as a bookmark during playback. l. BOOKMARK LIST Displays the list of saved viewing positions during playback. 32. ? (Help) (Currently not supported) GB13 User's Manual
  • Humax iCordHD | User Manual - Page 15
    1. Before Using the Product 1.6 Remote Control Batteries 1. Press down the top of the battery cover and slide the cover off. 2. Insert the new batteries. Make sure the plus (+) ends meet the plus markings on the battery case. 3. Slide the cover back into place. GB14 User's Manual
  • Humax iCordHD | User Manual - Page 16
    Select the most appropriate procedure depending on the equipment you have. Note: If you encounter any problems setting up your product, please contact your local product distributor. 2.1 Connecting the Antenna You can select . You can configure LNB 1 IN and LNB 2 IN independently. GB15 User's Manual
  • Humax iCordHD | User Manual - Page 17
    input connector, a special all-digital interface that provides the highest picture quality, connect the product and the TV using a HDMI cable as follows. GB16 User's Manual 57 HDMI Cable HDMI
  • Humax iCordHD | User Manual - Page 18
    input connector only, connect the product to the TV with an HDMI cable using an HDMI to DVI converter as follows. When equipped with an A/V receiver, 1. Connect one end of the HDMI cable to the HDMI input on the product and the other end to the HDMI to DVI converter. 2. Connect
  • Humax iCordHD | User Manual - Page 19
    2. Setup When there is no A/V receiver available, 1. Connect the product and the TV using an RCA cable. 2. Connect one end of the HDMI cable to the HDMI input on using the 3.5 Stereo Jack Cable to 2 RCA Y Cable. Caution: DO NOT CONNECT TO HEAD PHONE CONNECTOR ON TV! 57 HDMI Cable GB18 User's Manual
  • Humax iCordHD | User Manual - Page 20
    Component Select switch should be on YPbPr when using the component cable. 57 S/PDIF Cable RCA Cable Component Cable S/PDIF L AUDIO R COMPONENT IN GB19 User's Manual
  • Humax iCordHD | User Manual - Page 21
    enjoyment. • The Component Select switch should be on RGB when using the SCART cable. 57 SCART Cable SCART Cable TV SCART VCR SCART GB20 User's Manual
  • Humax iCordHD | User Manual - Page 22
    2. Setup 2.3 Powering On 1. Connect the power cord of the product to a wall outlet. 2. Turn on the power switch located at the back left side of the product. 3. Power on by pressing the STANDBY button of the remote control or the STANDBY button at the front of the product. GB21 User's Manual
  • Humax iCordHD | User Manual - Page 23
    after purchase, the installation wizard will operate automatically. Tip: The default password is 0000. If you have forgotten your password, please contact your local product distributor. 3.1 Language Language allows you to option if necessary. Select Next and press the OK button. GB22 User's Manual
  • Humax iCordHD | User Manual - Page 24
    , Motor, SCD Antenna Same tuners Different tuners 3.4 Default Channels Default Channels allows you to select the default channel list of each country. The satellites of the default channel list which belong to the country you have selected will appear. Select Yes and press the OK button to go to
  • Humax iCordHD | User Manual - Page 25
    dish and press the OK button to add another satellite. You can add up to four satellites. 8. Select Search and press the OK button. Note: • If you cannot find the required LNB frequency from the list, select User Define and manually enter the frequency using the NUMERIC(0-9) buttons and press
  • Humax iCordHD | User Manual - Page 26
    format and resolution of the screen. Select the value for Screen Ratio, Display Format and Resolution. Select Next and press the OK button. GB25 User's Manual
  • Humax iCordHD | User Manual - Page 27
    Format HDD and press the OK button. A popup will appear. Select Yes and press the OK button. You will be prompted to enter your password. Enter the password and assign the partition size. Select OK and press the OK button. Select Next and press the OK button. 3.10 Result After all setting
  • Humax iCordHD | User Manual - Page 28
    can use the installation menu to search for more channels. • Be sure to operate channel search even when you have selected default channels. GB27 User's Manual
  • Humax iCordHD | User Manual - Page 29
    switch between TV channels and radio channels. Note: You can switch channels using the channel list or TV guide. To return to the previous channel, press the LAST button. 4.2 Volume Control You can adjust the audio a HDMI cable, you can change to resolutions the TV supports only. GB28 User's Manual
  • Humax iCordHD | User Manual - Page 30
    Pan & Scan Pan & Scan Auto Auto Format Screen ratio 16:9 Icon and Text Pillar box Pillar box Pan & Scan Pan & Scan Auto Auto GB29 User's Manual
  • Humax iCordHD | User Manual - Page 31
    from the screen. Note: • When there is no subtitle available, Off does not appear. • Subtitles will be always displayed when switching programmes unless you select Manual in the subtitle menu. Refer to 7.2.2 Subtitle Display for details. GB30 User
  • Humax iCordHD | User Manual - Page 32
    4. Basic Operation 4.8 Teletext All teletext supporting channels have the teletext icon on the i-plate. 1. Press the TELETEXT button. 2. To display the teletext The general information is displayed on the screen as the following. 1 2 3 4 5 6 7 8 GB31 User's Manual
  • Humax iCordHD | User Manual - Page 33
    1080i Digital Displayed only when subtitle information is available. Displayed only when the channel provides HD programmes. Displays the resolution of the current programme. Displayed only when the programme is broadcast , use the / button to move to the previous or next page. GB32 User's Manual
  • Humax iCordHD | User Manual - Page 34
    multifeed list will appear. 3. Select an option using the / button and press the OK button. Note: Please refer to 4.6 Audio for audio option. GB33 User's Manual
  • Humax iCordHD | User Manual - Page 35
    search. My TV (RED) Favourite (GREEN) Satellite (YELLOW) Pay-TV (BLUE) The list of all TV channels. • Radio: The list of all radio channels. • HD TV: The list of all HD TV channels. • Recent Channels: The list of between TV and radio by simply pressing the TV/RADIO button. GB34 User's Manual
  • Humax iCordHD | User Manual - Page 36
    and press the OK button. 4. To change the list type, select from Simple, One Column and Two Column and press the OK button. GB35 User's Manual
  • Humax iCordHD | User Manual - Page 37
    again and select a favourite group using the / button. Note: To create a favourite list, refer to 5.1.1 Option. 5.3 Satellite List Satellite List is the list of channels included in the satellite you select. 1. Press the OK button while watching a programme. 2. Press the YELLOW button to display the
  • Humax iCordHD | User Manual - Page 38
    5. Channel List 5.4 Pay-TV Pay-TV List is the list of channels included in the CAS you select. 1. Press the OK button while watching a programme. 2. Press the BLUE button to display the CAS list. 3. Press the BLUE button again and select a Pay-TV List using the / button. GB37 User's Manual
  • Humax iCordHD | User Manual - Page 39
    the programme information of all channels in time and date order. 1. Press the GUIDE button. 2. Press the RED button. 1. Grid Guide 1. Move to the previous/next programme within the same channel using the / button channel to view the programme information of the chosen channel. GB38 User's Manual
  • Humax iCordHD | User Manual - Page 40
    The TVTV EPG is downloaded 30 minutes after the receiver has been switched to standby mode. Update occurs every eight hours in standby mode. 1. Press the GUIDE button. 2. Press the GREEN button to display the the LAST button to sort the programmes in time or alphabetical order. GB39 User's Manual
  • Humax iCordHD | User Manual - Page 41
    list of the programmes reserved. You can modify, delete or make new reservations. 1. Press the GUIDE button. 2. Press the YELLOW button to display the schedule of reservations. 3. Press the YELLOW button you want to delete. 2. Press the OPT+ button to delete the reservation. GB40 User's Manual
  • Humax iCordHD | User Manual - Page 42
    you to find the programme you want by entering the genre, name, time and day of the programme. 1. Press the GUIDE button. 2. Press the BLUE button to find programme. 3. Enter the keyword, genre, time & day of the programme seven of the most recent keywords that have been entered. GB41 User's Manual
  • Humax iCordHD | User Manual - Page 43
    6. TV Guide 2. Search by Genre 1. Press the OK button while the cursor is on Genre. 2. The list of genres will appear. Select a genre and values will appear. 3. To reserve a programme, select a future programme and press the OK button. 4. To search again, press the BLUE button. GB42 User's Manual
  • Humax iCordHD | User Manual - Page 44
    password. You can also lock the changes you have made using installation lock. Tip: The default password to enter your password. Enter the password using the NUMERIC(0-9) setting age limits. The password is required to view the password to watch programmes blocked by the age restriction. GB43 User
  • Humax iCordHD | User Manual - Page 45
    buttons. 3. Enter the password again in Verify Password to confirm. 3. Installation Lock Installation Lock allows you to block access to the installation menu settings you have previously made. 1. Select Installation Lock. 2. Select Enable or Disable using the OK or / button. GB44 User's Manual
  • Humax iCordHD | User Manual - Page 46
    the language for the menu. 1. Select Menu Language and press the OK button. 2. Select the language you want and press the OK button. GB45 User's Manual
  • Humax iCordHD | User Manual - Page 47
    Subtitle Display allows you to display the subtitle automatically. This service is provided when subtitles are available. 1. Select Subtitle Display. 2. Select Auto or Manual using the OK or / button Auto Manual Subtitles are displayed automatically in the predefined subtitle language. Subtitles
  • Humax iCordHD | User Manual - Page 48
    region in this menu. 1. Select GMT Offset and press the OK button. 2. Select the appropriate GMT offset value and press the OK button. GB47 User's Manual
  • Humax iCordHD | User Manual - Page 49
    turns off automatically. 1. Select Power Off. 2. Enter the powering off time using the NUMERIC(0-9) buttons or select Disable using the OK or / button. GB48 User's Manual
  • Humax iCordHD | User Manual - Page 50
    , select Format Video/Radio Partition and press the OK button. Enter the password to proceed. 3. To format the music/photo partition, select Format Music/Photo Partition and press OK button. You will be prompted to enter your password. Enter the password using the NUMERIC(0-9) buttons. GB49 User's Manual
  • Humax iCordHD | User Manual - Page 51
    7. Preferences 3. Recording Options You can set the recording padding time in case the recording starts earlier or ends later than scheduled. 1. Select Start/End Padding and press the OK button. 2. Select the padding time using the OK or / button. GB50 User's Manual
  • Humax iCordHD | User Manual - Page 52
    RGB. 2. VCR SCART You can select the VCR SCART output option. 1. Select VCR-SCART. 2. Select CVBS or S-Video using the OK or / button. GB51 User's Manual
  • Humax iCordHD | User Manual - Page 53
    Box, Pan & Scan and press the OK button. Screen Ratio Display Format 4:3 Letter Box, Pan & Scan, Auto 16:9 Pillar Box, Pan & Scan, Auto GB52 User's Manual
  • Humax iCordHD | User Manual - Page 54
    the number, the more transparent the screen. 3. TVTV EPG You can choose to receive and display the TVTV EPG data. 1. Select TVTV EPG. 2. Select Enable to deactivate TVTV EPG, you will be entitled to the standard program guide only; program data features and program preview will become limited.
  • Humax iCordHD | User Manual - Page 55
    to delete and press the OK button. You can select more than one channel. 2. Press the RED button to delete the chosen channels. GB54 User's Manual
  • Humax iCordHD | User Manual - Page 56
    . 3. Selecting a Channel Group 1. Press the YELLOW button to display the list of groups. 2. Select the group you want and press the OK button. GB55 User's Manual
  • Humax iCordHD | User Manual - Page 57
    the YELLOW button to complete. 5. Locking/Unlocking Channels Tip: The default password is 0000. 1. Select the channel you want to lock and press the an unlocked channel. • To watch locked channels, you must enter the password using the NUMERIC(0-9) buttons. 6. Select All/Release All 1. Press the
  • Humax iCordHD | User Manual - Page 58
    Favourite Groups 1. Press the GREEN button to display the list of groups. 2. Select the favourite group you want and press the OK button. GB57 User's Manual
  • Humax iCordHD | User Manual - Page 59
    . 4. Move the cursor to the destination using the / button, and press the OK button. 5. The selected channel is moved to the new location. GB58 User's Manual
  • Humax iCordHD | User Manual - Page 60
    exported from the receiver to a USB device(such as USB memory stick). The file format of the channel data is .udf format. Note: You can edit the channel data using Uniformula. Refer to the Humax website for information. and press the OK button. The channel data will be exported. GB59 User's Manual
  • Humax iCordHD | User Manual - Page 61
    ] 1. Press the MENU button. 2. Select Installation using the / button and press the OK button. 3. You will be prompted to enter the password. Enter the password to proceed. 4. Select Antenna Setting using the / button and press the OK button. 1. Antenna Type 1. Select Antenna Type and press the OK
  • Humax iCordHD | User Manual - Page 62
    when a single satellite signal is available. Select when two satellite signals from the same satellite are available. Examples when two satellite signals from two different satellites are available Satellite Setting 1. Select Satellite Setting and press the OK button. 2. Enter the value for Satellite
  • Humax iCordHD | User Manual - Page 63
    not available, select User Define and enter the transponder value directly. Select Search and press the OK button to go to search channels. GB62 User's Manual
  • Humax iCordHD | User Manual - Page 64
    DiSEqC Input of Satellite Setting Disable ASTRA 1 19.2E Single LNB 2. Twin LNB Antenna Type Fixed Antenna Connection Type Two Cable (Same) Tuner of Satellite Setting • Tuner 1 : ASTRA 1 19.2E • Tuner 2 : Disable DiSEqC Input of Satellite Setting Disable ASTRA 1 19.2E Twin LNB GB63 User's Manual
  • Humax iCordHD | User Manual - Page 65
    Satellite Setting • Tuner 1 : ASTRA 1 19.2E • Tuner 2 : HOTBIRD 13.0E DiSEqC Input of Satellite Setting Disable ASTRA 1 19.2E Single LNB HOTBIRD 13.0E Single LNB 2. Twin LNB for two different satellites of Satellite Setting Tuner 1 : ASTRA 1 19.2E, HOTBIRD 13.0E DiSEqC Input of Satellite Setting
  • Humax iCordHD | User Manual - Page 66
    Setting Tuner 1 : ASTRA 1 19.2E, HOTBIRD 13.0E, TURKSAT 1C 42.0E, ASTRA 3 23.5E DiSEqC Input of Satellite Setting • ASTRA 1 19.2E : DiSEqC A • HOTBIRD 13.0E : DiSEqC B • TURKSAT 1C 42.0E : DiSEqC C • ASTRA 3 23 .5 E Twin LNB TURKSAT 1C 42.0E Twin LNB AB C D DiSEqC 4 x1 Switch Out GB65 User's Manual
  • Humax iCordHD | User Manual - Page 67
    Search and press the OK button to go to search channels. 4. Search Channels Satellite Select All or the name of the satellite in antenna setting. Transponder Select All or the value in the transponder list and no channels available, a message indicating the result will pop up. GB66 User's Manual
  • Humax iCordHD | User Manual - Page 68
    . Parameter Transmission Modulation Symbol Rate FEC DVB-S Disabled 2-45Ms/s Auto, 1/2, 2/3, 3/4, 5/6, 7/8 Value DVB-S2 QPSK 10-30Ms/s Auto, 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 8PSK 10-31Ms/s Auto, 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 GB67 User's Manual
  • Humax iCordHD | User Manual - Page 69
    to multiple users eliminating the numerous cables required to support other electronics devices. If you are using more than one satellite receiver, set one receiver at a time and turn off the others while setting. Refer to the satellite antenna manual for details. 1. Press the MENU button. 2. Select
  • Humax iCordHD | User Manual - Page 70
    , the 22kHz Tone will be disabled. LNB Power Select Standard or High and press the OK button. Satellite Position Select Position1 or Position2 and then press the OK button. Transponder Select the value for the transponer. results will appear. Select Save and press the OK button. GB69 User's Manual
  • Humax iCordHD | User Manual - Page 71
    Motor Antenna in the Antenna Type menu. 5. The Connection Type is automatically set to One Cable. 6. Select Satellite Setting and press the OK button. 1. Motor Setting You can set the motor antenna for efficient channel search you select Universal, the 22kHz Tone will be disabled. GB70 User's Manual
  • Humax iCordHD | User Manual - Page 72
    . 1. Select Edit Satellite Data and press the OK button. 2. Enter the value for Satellite, Activate Satellite and Satellite Longitude. 3. Select Save and press the OK button to save and return to the previous screen. Satellite Select a satellite to edit and press the OK button. GB71 User's Manual
  • Humax iCordHD | User Manual - Page 73
    Satellite is activated only when User define is selected in Satellite menu. Satellite value for Satellite, Transponder, Motor Driving, and Driving Size. Satellite Select the satellite the of the selected satellite. 2. Wait until the antenna moves to the position of the satellite. 3. Confirm signal
  • Humax iCordHD | User Manual - Page 74
    by repeating the procedure above. Recalculate 1. Press the OK button to recalculate the position of the satellites based on one satellite. 2. To readjust all positions, select Yes and press the OK button. Note: When Motor / button. East West Sets East limit. Sets West limit. GB73 User's Manual
  • Humax iCordHD | User Manual - Page 75
    condition of the antenna. Repeat the procedure above if necessary. 5. Search Channels Satellite Select All or the name of the satellite in antenna setting. Transponder Select All or the value in the transponder list and available, a message indicating the result will pop up. GB74 User's Manual
  • Humax iCordHD | User Manual - Page 76
    will appear. Select Save and press the OK button. Note: If there are no channels available, a message indicating the result will pop up. GB75 User's Manual
  • Humax iCordHD | User Manual - Page 77
    Search Search Type 1. Select Search Type. 2. Select Manual using the OK or / button. Frequency 1. Select Frequency and enter the frequency using the NUMERIC(0-9) buttons. Note: Enter OK button. Note: If there are no channels available, a message indicating the result will pop up. GB76 User's Manual
  • Humax iCordHD | User Manual - Page 78
    immediately or save for later. 3. When there is no new software to update, a popup will appear. 2. Manual Update 1. Select Manual Update and press the OK button. 2. Enter the values for Satellite, Frequency, Polarization, Symbol Rate and FEC. 3. Select Search and press the OK button. 4. When new
  • Humax iCordHD | User Manual - Page 79
    You will be prompted to enter your password again before starting to load default setting. Enter the password to proceed. 6. When default setting is completed, installation wizard pops up automatically and assists channel search. Tip: The default password
  • Humax iCordHD | User Manual - Page 80
    . 3. Select Status and press the OK button. 4. The system status information will be displayed. 10.2 Signal Detection You can view the satellite, transponder information, signal strength and quality of the two tuners. 1. Press the MENU button. 2. Select System and press the OK button. 3. Select
  • Humax iCordHD | User Manual - Page 81
    . 4. The common interface information will be displayed. 5. Select the slot you want to view the information of and press the OK or button. GB80 User's Manual
  • Humax iCordHD | User Manual - Page 82
    Select DHCP to automatically set the IP address. Select Manual to enter the IP address manually. 7. Select Apply and press the OK button. other FTP client programmes from the PC and enter ftp:// followed by the IP address that appears on the Network menu of your PVR. 2. Enter the ID and password to
  • Humax iCordHD | User Manual - Page 83
    radio file list The music file list The photo file list Note: The supported formats of the HDD are FAT, FAT32, EXT2/3. 11.1 Video Press the storage 10. File name, time, date, duration 11. Icon of recording file 12. HD, CAS icon 13. Block picture Note: • Press the LAST button to sort the Manual
  • Humax iCordHD | User Manual - Page 84
    EDIT button while displaying the video list. Select the files you want to include in the play list and press the GREEN button. GB83 User's Manual
  • Humax iCordHD | User Manual - Page 85
    Lock and press the OK button. When unlocking a locked file, you will be prompted to enter your password. Enter the password and press the OK button. 3. To delete the file, select Delete and press the OK button. A moving from one device to another. Tip: The default password is 0000. GB84 User's Manual
  • Humax iCordHD | User Manual - Page 86
    button. When unlocking a locked file, you will be prompted to enter your password. Enter the password and press the OK button. 8. To rename files, press the OPT+ prompted to enter your password. Enter the password using the NUMERIC(0-9) buttons. Tip: The default password is 0000. GB85 User's Manual
  • Humax iCordHD | User Manual - Page 87
    , select Lock and press the OK button. When unlocking a locked file, you will be prompted to enter your password. Enter the password and press the OK button. 3. To delete the file, select Delete and press the OK button. A popup be copied when moving from one device to another. GB86 User's Manual
  • Humax iCordHD | User Manual - Page 88
    Lock and press the OK button. When unlocking a locked file, you will be prompted to enter your password. Enter the password and press the OK button. 8. To rename files, press the OPT+ button. Select Rename and enter . Select Select All or Release All and press the OK button. GB87 User's Manual
  • Humax iCordHD | User Manual - Page 89
    of the current folder. 4. Select Delete a file and press the OK button to delete the file. Select Yes and press the OK button. GB88 User's Manual
  • Humax iCordHD | User Manual - Page 90
    Select Yes and press the OK button. When deleting a locked file, you will be prompted to enter your password. Enter the password and press the OK button. 4. To make a playlist of the selected files, press the GREEN button. of the folder in the keyboard and press the YELLOW button. GB89 User's Manual
  • Humax iCordHD | User Manual - Page 91
    files, press the OPT+ button. Select Select All or Release All and press the OK button. Tip: The default password is 0000. 5. File Information Press the Info button while playing a music file to view the file information. 11.4 will be copied when moving from one device to another. GB90 User's Manual
  • Humax iCordHD | User Manual - Page 92
    Yes and press the OK button. When deleting a locked file, you will be prompted to enter your password. Enter the password and press the OK button. 4. To move the file to another folder, press the YELLOW button. The Press the LAST or EXIT button to return to the photo file list. GB91 User's Manual
  • Humax iCordHD | User Manual - Page 93
    button again while recording to adjust the recording end time. You can adjust the recording end time by -/+10 minutes using the / button. GB92 User's Manual
  • Humax iCordHD | User Manual - Page 94
    one among the current recordings. Select the channel you want to stop recording using the / button. 3. Select OK and press the OK button. GB93 User's Manual
  • Humax iCordHD | User Manual - Page 95
    forward to the current broadcasting point. If the watching point reaches the broadcasting (live) point, the programme is automatically played at normal speed. GB94 User's Manual
  • Humax iCordHD | User Manual - Page 96
    motion and fast rewind also make the time gap. Press the STOP button to close the time gap and go to live programme. GB95 User's Manual
  • Humax iCordHD | User Manual - Page 97
    after moving the watching point, it will move automatically. Press the STOP button to stop the current file and go to live TV. GB96 User's Manual
  • Humax iCordHD | User Manual - Page 98
    a location, select the location you want to delete and press the ADD BOOKMARK button. 1 1. Bookmark cursor 2. Watching point time 2 3 4 3. Watching point 4. Bookmark icon GB97 User's Manual
  • Humax iCordHD | User Manual - Page 99
    it is essential to have the most up-to-date software. Visit the Humax website to check the latest news and newly released software versions. (http:// (area where the signal can be received). The software update via satellite will only occur under the following circumstances . GB98 User's Manual
  • Humax iCordHD | User Manual - Page 100
    1. Edit Channel List 2. Edit Favourite List 3. Import/Export Channels 1. Antenna Setting 2. Search Channels 3. Software Update 4. Default Setting 1. Status 2. Signal Detection 3. Common Interface 4. Network GB99 User's Manual
  • Humax iCordHD | User Manual - Page 101
    14. Appendix 14.2 Trouble Shooting Before contacting your local service centre, please read the tips below carefully. If the problem persists after completing the following procedure, please contact your local product distributor or service centre for further instructions. 1. No message displayed on
  • Humax iCordHD | User Manual - Page 102
    new reservation. • Check that the product is switched on when starting recording 7. No password information is given. • The default password is always 0000. 8. Channel search does not work. • Make sure that the not be changed due to restriction of the tuner or connection type. GB101 User's Manual
  • Humax iCordHD | User Manual - Page 103
    installed Possible causes The satellite dish is not pointing at the satellite. Signal is too weak. Satellite dish is too small. Problem with LNB. Wrong The channel cannot be viewed with the appropriate model that supports data channels. Insert Smartcard. Insert the appropriate Smartcard for Manual
  • Humax iCordHD | User Manual - Page 104
    the correct CI module. Remove and reinsert the CI module. Replace CI module. Replace LNB Cable. Replace LNB. Remove the alien substance and contact local Service center in case damaged has occurred. GB103 User
  • Humax iCordHD | User Manual - Page 105
    Format 4:3, 16:9 Video Resolution 1080i, 720p, 576p, 576i Audio Decoding MPEG/MusiCam Layer I & II Audio Mode Single channel/Dual channel/Joint stereo/Stereo GB104 User's Manual
  • Humax iCordHD | User Manual - Page 106
    /60Hz SMPS Max. 57W Separate internal fuse. The input should be protected against lightning. 380mm×70mm×281mm 3.5kg 0 ºC to +45 ºC -10 ºC to +70 ºC GB105 User's Manual
  • Humax iCordHD | User Manual - Page 107
    satellite, cable or terrestrial systems. 4. EPG (Electronic Programme Guide to view channels or services without paying any subscription. satellite dish, focusing on satellite signals. A LNB converts signals received from satellite to a lower frequency and sends them to a satellite receiver Manual
  • Humax iCordHD | User Manual - Page 108
    . Satellites use receiver's digital signals to a TVs RF (Aerial) input, allowing you to connect the receiver to a PC to update receiver's software. 18. SCART A services when inserted into an appropriate receiver satellite. Each transponder can be used for distribution of several channels or services
  • Humax iCordHD | User Manual - Page 109
    /Fast Rewind, Slow Motion, Instant Replay, Commercial Skip, Repeat A-B. 26. TSR (Time Shifted Recording) A function that records the present programme temporarily to support trick-play. 27. HDD (Hard Disk Drive) The primary computer storage medium, which is made of one or more aluminum or glass
  • Humax iCordHD | User Manual - Page 110
    Service and Support Information concerning troubleshooting, software upgrade and product support is provided in the following websites and call centers. Should your product require warranty service, please contact HUMAX åk: +46 (0)550 85527 Mån-fre 08:00-16:30 Svenska/engelska GB109 User's Manual
  • Humax iCordHD | User Manual - Page 111
    9 56186 130 ma-pe 8:00-16:00 Suomi/Englanti Austria Tel: Opening Hours: E-mail: Website: Language: 0820 400675 (€0,14/min) Mon-Sun 8:00-23:00 [email protected] www.humax-digital.de Deutsch/English/Turkish Note: For hardware repair, please visit our website. GB110 User
  • Humax iCordHD | User Manual - Page 112
    times. The setup is complete. 7. If the product does not power off, repeat the instructions from 4 to 6. Note: • When no code is entered for one minute the Universal POWER 1 2 3 4 5 6 7 8 9 0 MENU FAST REWIND AUDIO POWER TUNER CD DVD VCR TV CABLE SAT AUX TAPE PHONO MENU/MODE - GB111 User's Manual
  • Humax iCordHD | User Manual - Page 113
    EXIT OK UP LEFT RIGHT DOWN VOL+ VOLMUTE CH+ CH- AUDIO - CLEAR OK UP LEFT RIGHT DOWN VOL+ VOLDISPLAY MUTE PRESET+ PRESETFM/AM GB112 User's Manual
  • Humax iCordHD | User Manual - Page 114
    , 160 093, 118 064 004, 017, 018, 064, 075, 093, 099, 117, 172 172, 177 015, 025, 057 124, 172 071 015 017 GB113 User's Manual
  • Humax iCordHD | User Manual - Page 115
    CONIC CONTEC CONTINETAL EDISON COSMOS CRAIG CRIPTOVISION CROSLEY CROWN CS ELECTRONICS CTC CURTIS MATHES CXC CYBERTRON DAEWOO DAINICHI DANSAI DAYTON DE GRAAF DECCA GB114 User's Manual 023, 046 004 018 063, 018, 078 115 018 159, 160 101, 123 133, 161 004, 117 029, 084, 172 177 015, 019, 025, 026
  • Humax iCordHD | User Manual - Page 116
    099, 102, 108, 109, 110, 111, 112, 113, 114, 124, 148, 172, 177 062 HUMAX HUSPI ELEKTRONIK HYPERVISION HYPSON ICE ICES IMA IMPERIAL INDESIT INDIANA INFINITY INGEKEN INGELEN INNOHIT INNOVA INTEQ ISKRA INTERBUY INTERFUNK INTERVISION 161 009, 015 062 124, 172, 177 012 161 033 GB115 User's Manual
  • Humax iCordHD | User Manual - Page 117
    LUXOR LXI M ELECTRONIC MAGNADYNE MACYS MAGNAFON MAGNASONIC MAGNAVOX MAJESTIC MANDOR MANESTH MARANTZ MARCY´S MARELLI MARK MATSUI MATSUSHITA MC MICHAEL MEDIATOR MEGATRON GB116 User's Manual 158 004, 005, 017, 018, 042, 061, 068 018 098, 160 004 015, 019, 052, 056, 063, 074, 172, 177 097 097 071
  • Humax iCordHD | User Manual - Page 118
    , 106, 124 127, 158 015, 016, 019 004, 009, 015, 016, 018, 019, 025, 026, 050, 063, 071, 078, 089, 124, 137, 161 GB117 User's Manual
  • Humax iCordHD | User Manual - Page 119
    SEMP SENTRA SHARP SHINTOM SHINTOSHI SHIVAKI SHOGUN SHORAI SIAREM SICATEL SIEMENS SIGNATURE SILVER SIMPSON SINGER SINUDYNE SKANTIC SKY SOGERA SOLAVOX SONITRON SONOKO GB118 User's Manual 019 062 084 085 005, 017, 028, 038, 041, 106, 107, 108, 124, 129, 172 018 099 018, 064, 071 ,097, 136, 143, 147
  • Humax iCordHD | User Manual - Page 120
    , 172 018, 062, 098, 106, 158, 161 133 009, 015 018, 063, 071, 133, 161 108 076, 099 006, 007, 029, 177 002 GB119 User's Manual
  • Humax iCordHD | User Manual - Page 121
    105 153 027 017 102, 134 088 103 035, 076, 180 130 021, 138, 139, 144, 150 066, 095, 105 035, 066 131 GB120 User's Manual POLAROID POLK AUDIO PROCEED PROSCAN RCA SAMSUNG SANSUI SANYO SEARS Sensory Science SHARP SONY SYLVANIA SYMPHONIC TATUNG TECHNICS TECHWOOD THOMPSON TIVO TOSHIBA VENTURER YAMAHA
  • Humax iCordHD | User Manual - Page 122
    Functions for VCR 067) SAMSUNG SANSUI SONY TOSHIBA ZENITH 4. Audio & AUX Code List Brand Audio Receiver ADCOM AIWA AKAI ANTHEM ARCAM ATLANTIC TECHNOLOGY AUDIO FILE B & K BOSE BOSTON ACOUSTICS CARVER CLARION DELPHI 040, 048, 063, 065, 110, 228 047, 059 019 026, 094, 131, 175 GB121 User's Manual
  • Humax iCordHD | User Manual - Page 123
    TOSHIBA WINBOOK XM Radios DELPHI KENWOOD POLKAUDIO SONY 190, 194 190, 194 190, 194 190, 194 190, 194 251 252 251 220 MDB1.0 GB122 User's Manual
  • Humax iCordHD | User Manual - Page 124
    14. Appendix 14.8 OPEN SOURCE SOFTWARE NOTICE HUMAX products use certain open source operating system software distributed pursuant to GNU GENERAL PUBLIC LICENSE Version 2 and GNU and lib/ss libraries which are made available under an MIT-style license. LGPL Software uClibc GB123 User's Manual
  • Humax iCordHD | User Manual - Page 125
    price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive they have is not the original, so that any problems introduced by others will not reflect on the original Manual
  • Humax iCordHD | User Manual - Page 126
    , if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License this License may add an explicit geographical distribution limitation GB125 User's Manual
  • Humax iCordHD | User Manual - Page 127
    may differ in detail to address new problems or concerns. Each version is given a this. Our decision will be guided by the two goals of preserving YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO for more details. You should have received a copy of the GNU General Manual
  • Humax iCordHD | User Manual - Page 128
    price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive original author's reputation will not be affected by problems that might be introduced by others. Finally, Manual
  • Humax iCordHD | User Manual - Page 129
    . 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright Sections 1 and 2 above on a medium customarily used for software GB128 User's Manual
  • Humax iCordHD | User Manual - Page 130
    offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the or modifying the Library or works based on it. GB129 User's Manual
  • Humax iCordHD | User Manual - Page 131
    Library by all those who receive copies directly or indirectly through you, may differ in detail to address new problems or concerns. Each version is given a this. Our decision will be guided by the two goals of YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN Manual
  • Humax iCordHD | User Manual - Page 132
    FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice GB131 User's Manual
  • Humax iCordHD | User Manual - Page 133
    RoHS/Manual/iCordHD/500GBDE *20000-00173* 20000-00173

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.