Hunter 20180 Owner's Manual - Page 12

7 • Completing Your Installation With or Without a Bowl Light Fixture Housing Assembly Screw Your Hunter fan comes with an integrated light fixture assembly and an optional switch housing cap and plug button. This feature gives you the option of installing the fan with OR without the included light fixture. The steps below direct you whether or not you are installing a light fixture. WARNING: Use only the light fixture supplied with this fan model. 7-1. If you want to install the light fixture, proceed with step 7-2 now. If you do not want to install the light fixture, you need to uninstall it now. See "Uninstalling the Light Fixture" on page 14. Once you have uninstalled the light fixture, continue with step 7‑2. 7-2. To attach the lower switch housing, connect the upper plug connectors from the motor to the lower plug connectors in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-3. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with two #6-32 x 7/8" housing assembly screws. If you are not installing the light fixture, your installation is complete. Otherwise, proceed with step 7-4. 7-4. The last installation step when installing the light fixture is to install the glass bowl. See "Installing the Glass Bowl" on page 13 for instructions. 12 42676-01 • 04/04/11 • Hunter Fan Company