Hunter 20422 Owner's Manual - Page 14

7 • Completing Your Installation With or Without a Light Fixture (Continued) Switch Housing Assembly Screws Plug Connector Lower Switch Housing Steps 7-10 - 7-11 7-10. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-11. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. If you are not installing the light fixture, your installation is complete. Otherwise, proceed with step 7-12. 7-12. Install the included CFL bulb (19 Watt Maximum) into the socket. 7-13. Insert the globe into the fixture. Install and tighten the thumbscrews manually. Do not overtighten. Note: If thumbscrews are pre-threaded, loosen the screws before inserting the globe, then retighten securely. Globe Thumbscrews Steps 7-12 - 7-13 14 42606-01 • 06/27/11 • Hunter Fan Company