Hunter 20720 Owner's Manual - Page 13

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Uninstalling the Light Fixture 7-15. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the red wire. 7-16. Disconnect the plug connectors between the two white wires. 7-17. Uninstall the connector and washer from the end of the light fixture inside the lower switch housing. 7-18. Unscrew the threaded rod of the light fixture from the lower switch housing. 7-19. Remove the light fixture from the lower switch housing pulling disconnected wires through the hole in the center of the lower switch housing. Note: When removing the wires, pull the thin plug Threaded Rod connector (male) through first, and then pull the other plug connector (female) through the hole. 7-20. Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing. 7-21. Install the switch housing cap and plug button to the lower switch housing. 7-22. Once you have uninstalled the light fixture, continue with step 7‑6. Steps 7-17 - 7-19 Lower Switch Housing Male Dummy Terminal Female Dummy Terminal Cap Plug Button Step 7-21 13 45030-01 • 09/11/09 • Hunter Fan Company