Hunter 20772 Owner's Manual - Page 6
metal bracket to secure the square hanger.
![]() |
View all Hunter 20772 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Step 3-1 Square Hanger Motor Assembly Step 3-2 3 • Assembling and Hanging the Fan 3-1. Position the square hanger so that the green ground wire attached to the square faces out of the large opening in the metal bracket. 3-2. Holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling plate. WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling. 3-3. Install two locking screws through the holes in the side of the metal bracket to secure the square hanger. Green Ground Wire Step 3-3 Green Ground Wire #8-32 x 1" Screw Locking Screw 6 42823-01 • 02/17/10 • Hunter Fan Company
![](/manual_guide/products/hunter-20772-owners-manual-135f236/6.png)
6
42823-01
•
02/17/10
•
Hunter Fan Company
Step 3-2
Green
Ground Wire
3-1. Position the square hanger so that the green ground wire attached
to the square faces out of the large opening in the metal bracket.
3-2. Holding the wires out of the way, lift the motor assembly and
place the square hanger into the opening in the ceiling plate.
WARNING:
Make sure the square hanger can not rotate in the
metal bracket. Failure to do so could result in the fan falling.
3-3. Install two locking screws through the holes in the side of the
metal bracket to secure the square hanger.
Step 3-1
Motor
Assembly
Square
Hanger
Step 3-3
Locking Screw
Green
Ground Wire
3 • Assembling and Hanging the Fan