Hunter 21095 Owner's Manual - Page 10
Warning, Caution - fan model
View all Hunter 21095 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7 • Completing Your Installation With a Light Fixture Your Hunter fan comes with an integrated light fixture assembly. WARNING: Use only the light fixture supplied with this fan model. 7-1. To attach the light kit top housing, partially install two housing assembly screws into the light kit mounting plate. 7-2. Feed the upper plug connector through the center opening of the light kit top housing. 7-3. Align the keyhole slots in the housing with the housing assembly screws. Light Kit Mounting Plate 7-4. Turn the light kit top housing counterclockwise until the housing assembly screws are firmly situated in the narrow ends of the keyhole slots. Install the remaining screw into the housing. Tighten Light Kit Top all three screws firmly. Housing CAUTION: Make sure the light kit top housing is securely attached to the light kit mounting plate. Failure to properly attach and tighten all three assembly screws could result in the light kit top housing and light fixture falling. Upper Plug Connector Steps 7-1 - 7-3 Housing Assembly Screw 10 45057-01 • 06/24/09 • Hunter Fan Company