Hunter 21313 Owner's Manual - Page 12

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued) Installing the Glass Bowl 7-3. First install included 14W CFL bulbs into the sockets. 7-4. If the fandangle is attached to the extra pull chain, remove it now. 7-5. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.) 7-6. Thread the fan pull chain through the hole in the metal disc. Then, thread the fan pull chain through the hole in the center of the glass bowl. 7-7. Thread the light pull chain through the hole in the center of the glass bowl. Then, Thread the light pull chain through the hole in the center of the cover plate. 7-8. Thread the fan pull chain through the grommet hole in the side of the cover plate. 7-9. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl. 7-10. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight. 7-11. Reattach the fandangle to the extra pull chain. Breakaway Connector For Light Bulbs Metal Disk Metal Rod Glass Bowl Cover Plate Finial 12 42666-01 • 10/29/08 • Hunter Fan Company