Hunter 21318 Owner's Manual - Page 8
For Standard or Angled mounting
View all Hunter 21318 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy. Feed the wires from the fan through the downrod. 3-3. Loosen the square head setscrew on the adapter to install the downrod. Note: When the downrod is fully installed, 2-3 threads on the pipe will still be visible; this is normal. Securely retighten the setscrew with a wrench or pliers. CAUTION: The adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from unscrewing. Once assembled, do not remove the downrod. 3-4. Raise the fan and place the hook on the ceiling plate through the round hole in the rim. Steps 3-1 - 3-3 Step 3-4 Downrod Canopy Setscrew Round Hole 8 42863-01 • 06/22/11 • Hunter Fan Company